Manual Toolson Pro HMD1800PRO (page 13 of 108) (English, German, Dutch, Danish, French, Italian, Swedish, Turkish, Norwegian, Finnish)

781902

Zoom out

Zoom in

1/108

13 І 108

Unpacking

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the pack-

aging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage.

• If possible, store the packaging until the warranty

period has expired.

Description of parts (Fig.1)

1. Hand-Mixer

2. Mortar beater - R

3. Mortar beater - L

4. ON / OFF-switch

5. Trip switch

6. Speed control

7. 2-speed switch

8. Handle

9. Holder - R

10. Holder - L

11. Sleeve - R

12. Sleeve - L

General safety standards

ATTENTION!

Please read the entire instructions. Failure to fol-

low the instructions below may result in causing

electric shock, re and / or serious injuries.

Keep all safety information and instructions for fu-

ture reference.

In this safety information the term “power tool” refers

to mains operated power tools (with power cord) and

battery operated power tools (without power cord).

Workplace

• Keep your work area clean and tidy. Cluttered and

dark working areas are accident-prone.

• Do not operate power tools in explosive atmosphe-

res, where ammable liquids, gases or dust are pre-

sent. Power tools generate sparks which may ignite

the dust or fumes.

• Keep children and other persons away while opera-

ting a power tool. Distractions can be a reason for

losing control of the tool.

Electrical safety

• Power tool plugs must match the outlet. Do not

modify the plug in any way. Do not use any adap-

ter plugs with grounded devices. Unmodied plugs

and matching outlets will reduce the risk of electric

shock.

• Avoid physical contact with grounded surfaces such

as pipes, radiators, ranges and refrigerators. If your

body is grounded the risk of an electric shock incre-

ases.

• Do not expose the power tool to rain or wet condi-

tions. Water that enters a power tool will increase

the risk of electric shock.

• Do not abuse the cord; do not use the cord to carry

or hang up the power tool or to unplug the power

tool from the mains. Keep the power cord away from

heat, oil, sharp edges or the power tool’s moving

parts. Damaged or tangled power cords will increase

the risk of electric shock.

• When operating a power tool outdoors, use only

extension cords that are approved for outdoor use.

The use of an extension cord that is adapted for out-

door use reduces the risk of electric shock.

• If working with the power tool in a damp location

Introduction

MANUFACTURER:

scheppach Fabrikation von

Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment and

success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by the

product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs due

to the non-compliance of the electric regulations and

VDE regulations 0100, DIN 57113 / VDE0113.

WE RECOMMEND:

Read through the complete text in the operating instruc-

tions before installing and commissioning the device.

The operating instructions are intended to help the user

to become familiar with the machine and take advan-

tage of its application possibilities in accordance with the

recommendations. The operating instructions contain

important information on how to operate the machine

safely, professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and how to in-

crease reliability and service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in your

country. Keep the operating instructions package with

the machine at all times and store it in a plastic cover

to protect it from dirt and moisture. Read the instruction

manual each time before operating the machine and

carefully follow its information. The machine can only be

operated by persons who were instructed concerning the

operation of the machine and who are informed about

the associated dangers. The minimum age requirement

must be complied with. In addition to the safety require-

ments in these operating instructions and your country’s

applicable regulations, you should observe the generally

recognized technical rules concerning the operation of

woodworking machines.

Range of application

Your electronic mixing unit has been designed to blend

and stir the following materials:

- Thin liquid mixing material such as paints, varnishes

or plaster.

- Thick liquid mixing material such as adhesives, pas-

tes, lling compounds or mortar.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toolson Pro HMD1800PRO in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Turkish, Norwegian, Finnish as an attachment in your email.

The manual is 3.66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toolson Pro HMD1800PRO Manual

Product: