Manual Toolson KGZ4400 (page 14 of 180) (All languages)

782350

Zoom out

Zoom in

1/180

14 І 180

• Disconnect tools. When not in use, before servicing

and when changing accessories such as blades, bits,

cutters, disconnect tools from the power supply.

• Remove adjusting keys and wrenches. Form the habit

of checking to see that keys and adjusting wrenches

are removed from the tool before turning it on.

• Avoid unintentional starting. Ensure switch is in ‘off’

position when plugging in.

• Use outdoor extension leads. When the tool is used

outdoors, use only extension leads intended for out-

door use and so marked.

• Stay alert. Watch what you are doing, use common

sense and do not operate the tool when you are tired.

• Check damaged parts. Before further use of the tools,

it should be carefully checked to determine that it will

operate properly and perform its intended function.

Check the alignment of moving parts, binding of mov-

ing parts, breakage of parts, mounting and any other

conditions that may affect its operation. A guard or

other part that is damaged should be properly repaired

or replaced by an authorised service centre unless

otherwise indicated in this instruction manual. Do not

use the tool if the switch does not turn on and off.

• Warning. The use of any accessory or attachment oth-

er than one recommended in this instruction manual

may present a risk of personal injury.

• Have your tool repaired by a qualied person. This

electric tool complies with the relevant safety rules.

Repairs should only be carried out by a qualied per-

son using original spare parts, otherwise this may re-

sult in considerable danger to the user.

Additional Safety Rules For Mitre Saws

• Do not use saw blades which are damaged or de-

formed.

• Do not use the saw without guards in position.

• Replace the table insert when worn.

• Do not use the saw to cut anything other than wood

or similar materials.

• Use only saw blades recommended by the manufac-

turer according to EN847-1.

• Connect your mitre saw to a dust collecting device

when sawing.

• Select saw blades in relation to the material to be cut.

• Check the maximum depth of cut.

• When sawing long work pieces, always use extension

wings to provide better support, and use clamps or

other clamping devices.

• Wear ear protection.

WARNING! Noise can be a health hazard. When the

noise level exceeds 85dB(A), be sure to wear ear

protection.

Proper use

CE tested machines meet all valid EC machine

guidelines as well as all relevent guidelines for each

machine.

• The machine must only be used in technically per-

fect con dition in accordance with its designated use

and the in structions set out in the operating manual,

and only by safety-conscious persons who are fully

• Check the delivery for completeness.

• Read the operating instructions to make yourself fa-

miliar with the device prior to using it.

• Only use original TOOLSON parts for accessories as

well as for wearing and spare parts. Spare parts are

available from your specialized dealer.

• Specify our part numbers as well as the type and year

of construction of the device in your orders.

In these operating instructions we have marked the

places that have to do with your safety with this

sign: m

General Safety Rules

WARNING! When using electric tools basic safety

precautions should always be followed to reduce the

risk of re, electric shock and personal injury.

• Keep work area clear. Cluttered areas and benches

invite injuries.

• Consider work area environment. Do not expose tools

to rain. Do not use tools in damp or wet locations.

Keep work area well lit. Do not use tools in the pres-

ence of ammable liquids or gases.

• Guard against electric shock. Avoid body contact with

earthed or grounded surfaces.

• Keep other people away. Do not let others, especially

children, get involved in the work touch the tool or the

extension lead and keep them away from the work

area.

• Store idle tools. When not in use, tools should be

stored in a dry locked-up place, out of reach of chil-

dren.

• Do not force the tool. It will do the job better and safer

at the rate for which it was intended.

• Use the right tool. Do not force small tools to do the

job of a heavy duty tool. Do not use tools for purposes

not intended; for example do not use circular saws to

cut tree limbs or logs.

• Dress properly. Do not wear loose clothing or jewellery

they can be caught in moving parts. Non-skid footwear

is recommended when working outdoors. Wear pro-

tective hair covering to contain long hair.

• Use protective equipment. Use safety glasses. Use

face or dust mask if cutting operations create dust.

• Connect dust extraction equipment. If devices are pro-

vided for the connection of dust extraction and col-

lecting equipment, ensure these are connected and

properly used.

• Do not abuse the cable. Never pull the power cable

to disconnect it from the socket. Keep the cable away

from heat, oil and sharp edge.

• Secure work. Where possible use clamps or a vice to

hold the work. It’s safer than using your hand.

• Don’t over reach. Keep proper footing and balance

at all time.

• Maintain tools with care. Keep cutting tools sharp and

clean for better and safer performance. Follow instruc-

tions for lubricating and changing accessories. Inspect

power cables periodically and if damaged have them

replaced by an authorised service facility. Inspect ex-

tension cables periodically and replace if damaged.

Keep handles dry, clean and free from oil and grease.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toolson KGZ4400 in the language / languages: All languages as an attachment in your email.

The manual is 6.33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toolson KGZ4400 Manual

Product: