Manual Toolson DKS1600 (page 21 of 240) (All languages)

782195

Zoom out

Zoom in

1/240

21GB

4. Supplied package

• Open the packaging and take out the equipment

with care.

• Remove the packaging material and any packaging

and/or transportation braces (if available).

• Check to see if all items are supplied.

• Inspect the equipment and accessories for trans-

port damage.

• If possible, please keep the packaging until the end

of the guarantee period.

Important

The equipment and packaging material are not toys.

Do not let children play with plastic bags, foils or small

parts. There is a danger of swallowing or suffocating!

• Fretsaw

• Saw blade guard

• Blow-off device

• Spare saw blade (2x) (for wood and plastics)

• Allen key, 3 mm

• Original operating instructions

5. Proper use

The fretsaw was designed to cut square-edged tim-

ber or other workpieces such as Plexiglas, glass ber

reinforced plastic, foam, rubber, leather, and cork. Do

not use this saw to cut round materials. Round mate-

rials can easily become jammed. Risk of injury! Parts

can be catapulted!

The equipment may only be used for the tasks it is

designed to handle. Any other use is deemed to be a

case of misuse. The user/operator and not the manu-

facturer will be liable for any damage or injuries of any

kind caused as a result of this.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial appli-

cations. Our warranty will be voided if the equipment

is used in commercial, trade or industrial businesses

or for equivalent purposes.

• The equipment is to be operated only with suitable

saw blades. It is prohibited to use any type of cut-

ting-off wheel.

• To use the equipment properly you must also ob-

serve the safety information, the assembly instruc-

tions and the operating instructions to be found in

this manual.

• All persons who use and service the equipment

have to be acquainted with these operating instruc-

tions and must be informed about the equipment’s

potential hazards.

• It is also imperative to observe the accident preven-

tion regulations in force in your area.

• The same applies for the general rules of health

and safety at work.

• The manufacturer will not be liable for any changes

made to the equipment nor for any damage result-

ing from such changes.

Residual risks

Even if you use this electric power tool in accordance

to instructions, certain residual risks cannot be elimi-

nated. The following hazards may arise in connection

with the equipment’s construction and layout:

• Lung damage if no suitable protective dust mask

is applied

• Damage to hearing if no suitable ear protection is

applied

• Contact with the blade in the uncovered cutting

zone

• Injuries (cuts) when changing the blade

• Crushed ngers

• Kickback

• Tilting of the workpiece due to inadequate support

• Touching the blade

• Catapulting of pieces of timber and workpieces

6. Technical data

Mains voltage: 220-240 V~/50 Hz

Power input: 80 Watt (S1) 120 Watt

(S6 30%)

Stroke rate: 500-1700 min-1

Protection type: IP 20

Stroke: 12 mm

Base area: 630 x 295 mm

Tilting range of table: 0° - 45°

Table size: 415 x 255 mm

Length of saw blade

approx.:

134 mm

Reach: 406 mm

Max. cutting height at

90°:

50 mm

Max. cutting height at

45°:

22 mm

minimum size work

piece wxh:

100 x 22 mm

maximum size work

piece wxh:

400 x 50 mm

Weight: 12,7 kg

Operating mode S6 30%:

Continuous operation with idling (cycle time 10 min-

utes). To ensure that the motor does not become ex-

cessively hot, it may only be operated for 30% of the

cycle at the specied rating and must then be allowed

to idle for 70% of the cycle.

Noise emission values

Sound

Sound values were measured in accordance with EN

61029.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toolson DKS1600 in the language / languages: All languages as an attachment in your email.

The manual is 8.64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toolson DKS1600 Manual

Product: