622124

Toolland TM91001 Manual

5
Zoom out
Zoom in
Previous page
1/15
Next page
TM91001
V. 02 – 14/04/2015 3 ©Velleman nv
• Push the trigger-locking lever with the middle finger.
• For another nail/staple you must completely lift up the machine from the workplace.
5. Clearing a Jammed Fastener
• Before removing a blocked nail/staple you must switch off the machine and disconnect the air supply.
• Remove the nail/staple stick from the magazine.
• Remove the blocked nail/staple. Use a pincer if necessary.
• Lubricate the shot duct.
• Place a new nail/staple stick in the magazine.
6. Cleaning and Maintenance
• Disconnect the air supply from the tool before lubricating.
• Your tool requires lubrication before you use it for the first time.
• Wipe off excessive oil at the exhaust. Excessive oil will damage O-rings of the tool. If in-line oilier is used,
manual lubricating through the air inlet is not required on a daily basis.
• Turn the tool so the inlet is facing up hand put one drop of high speed oil. Never use detergent oil or
additives. Operate the tool briefly after adding oil.
7. Technical Specifications
max. operating pressure
7 bar
nail size
10-32 mm
staple size
6-32 mm
capacity
100 pcs
weight
1.25 kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.toolland.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toolland TM91001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toolland TM91001 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info