Manual Toolland FT 92 (page 20 of 22) (English, German, Dutch, French, Portuguese, Spanish)

622632

Zoom out

Zoom in

1/22

FT 92 English

www.toolland.eu 20

Pos. 3 (Minimum)

 Open the valve on the gas cylinder.

 Put the control knob in ‘Start position and

Maximum heating’ (Pos.1) and press

down.

 After 10 seconds – while holding the

control knob in pressed condition – push

the piezoelectric ignition button fully

down. It could be necessary to push the

piezo button several times before the

pilot is lighted. Each time you push the

piezo button down you will hear a clicking

sound as well as see a spark on the pilot

burner. This spark will light the pilot.

 Once the pilot is lit, continue on holding

the gas control knob in the pressed

position for further 20 seconds. The

heater will heat at Maximum (Pos.1)

 Now you can put the control knob in the

desired heating position. Pos.2 =

Medium, Pos.3 = Minimum.

 To turn off the device, completely close

the gas cylinder valve.

 Do not move the heater when it is

operating.

6. MAINTENANCE

 Always turn off the appliance before

cleaning it and wait till it is cooled

completely.

 To clean the outside of the heater, use a

soft cloth soaked with water and a liquid

detergent. Do not use scouring pads or

abrasive products. Do not use water or

abrasive products.

 Regularly inspect the atmosphere

analyzer and the aeration holes.

 Regularly check the condition of the

connections. Check the condition of the

hose and the pressure regulator every

time the gas cylinder is changed.

 Take care not to hit or damage the

surface of the burner, the fittings and gas

tubes, the tap and all the other

components of the gas circuit.

 We recommend that you have the heater

inspected once a year by a qualified

professional.

 If you decide not to use the heater for an

extended period, you must follow the

instructions bellow:

- Close the tap on the cylinder and

disconnect the pressure regulator

from the cylinder.

- Store the cylinder in a well-ventilated

room, far from inflammable or

explosive materials and preferably

outside your home. Never store the

cylinder in a basement or attic.

- The heater must be stored in a dry

place and protected from dust. It is

recommended to store the heater in

its original packaging.

7. ENVIRONMENT

Should your appliance need replacement

after extended use, do not put it in the

domestic waste but dispose of it in an

environmentally safe way.

8. WARRANTY

Refer to the enclosed warranty conditions for

the terms and conditions warranty.

9. TECHNICAL SPECIFICATIONS

Standen

Vermogen

3,2kW

Gas type

Propaan/Butaan

Gas Category

I3+

Mbar

28-30/37

Ignition

Piezo

Consumption

235g/u

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toolland FT 92 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toolland FT 92 Manual

Product: