693097
4
Zoom out
Zoom in
Previous page
1/8
Next page
charging your monitor before rst use:
THE PARENT UNIT:
The parent unit is supplied with rechargeable batteries 2 x AAA (LR3) that should be inserted before use.
To insert batteries, open the battery casing with a screwdriver. Insert the supplied 2 x AAA (LR3)
rechargeable batteries. Take extra care to ensure that the batteries are inserted correctly and the right
way round. Ret the battery casing securely with a screwdriver.
DO NOT use non-rechargeable batteries.
Place the parent unit on the docking station and recharge for 10 hours before use.
The charging icon on the LCD will show the charging status.
Turn on the parent unit by pressing the POWER key (15) for 3 seconds.
The docking station will light red to show that the parent unit is securely docked on the station and
connection is good.
Turn o the parent unit by pressing the power key (15) for 5 seconds.
THE BABY UNIT:
The baby unit does not require batteries if powered from the mains.
If mains usage is not available, the baby unit will operate on batteries 4 x AA (LR6), which are not supplied.
To insert batteries, open the battery casing with a screwdriver. Insert 4 x AA (LR6) batteries (rechargeable
or non-rechargeable, but not mixed) and close casing securely with screwdriver. Take extra care to
ensure that the batteries are inserted correctly and the right way round.
There is NO charging function on the baby unit for rechargeable batteries.
The screen will illuminate on the baby unit when switched on.
The battery icons will indicate if the battery is low.
Battery power is disconnected automatically when the mains adaptor is in use. If the adaptor is turned
o at the mains and still remains connected to the monitor then the batteries will be automatically activated.
When the baby unit is connected to the power supply, the LCD backlight will be on. With battery power
only, the LCD backlight will last only approx. 20 seconds.
Turn on the baby unit by pressing the POWER key (1).
correct use of batteries
Non-rechargeable batteries are not to be recharged.
Rechargeable batteries are to be removed from the baby unit before being charged.
Rechargeable batteries are only to be charged under adult supervision.
Dierent types of batteries or new and used batteries are not to be mixed.
Only batteries of the same or equivalent type as recommended are to be used.
Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed
from the monitor.
CAUTION: risk of severe malfunction if battery
is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
setting up your baby unit
Connect the mains adaptor into a
nearby wall socket in your baby’s
nursery and switch on the power
at the mains.
Press and hold (1) for 3 seconds
until the LCD/Power LED illuminates.
Ensure that the sensor pad on-o
switch (11) is turned OFF.
LED
H
I
FUNCTION
Sensor pad
status
Alarm
COLOUR
Green
Red
Flashing red
INDICATION
Sensor pad connection is good and movement
is detected from the sensor pad
No movement is detected at least in last 20s
Baby has started to move again, but there has
been an issue with the baby
baby unit LEDs
TEMPERATURE
BATTERY
Degree
Celsius
Fahrenheit
Empty and needs to be recharged
Low
Medium
Full
ON
baby unit icons
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
1
2
3
IH
1
11
WARNING about using the baby unit!
The baby unit should be 1 to 1.5 metres away from the baby’s cot on a at surface.
Never place the baby unit in the baby’s cot.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tommee Tippee 1082S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tommee Tippee 1082S in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info