761310

Tomado TGH6001W Manual

21
Zoom out
Zoom in
Previous page
1/120
Next page
EN - 21

If the hob is connected according to the class 1 specifications, only flexible metal hose can be used which meet the valid
national regulations. Gas feeding connector must be G ½” threaded coupling. Use only pipes and fittings that
meet the requirements of the valid standards. Maximum admissible length of the flexible hose is 2000 mm. Make sure the
connection is not touching any mobile elements which could damage the hose.

The hob comes with a G ½” threaded coupling. The connection to gas supply must be done in a manner that excludes stresses
in any point of the pipework or parts of the appliance. Make sure you do not exceed the torque when making the connection
(maximum torque is 20 Nm). Otherwise, the connection may be faulty or leaks may occur.
The gas hose should not touch metal elements of the hob back shield.
 Each time you replace a reducer, carry out technical inspection of the hob that covers gas valves and proper
operation of the flame failure cut-off device.
 On completion of the hob installation, the tightness of all connections should be checked, e.g. applying water
with soap. Do not use fire to check tightness.
ELECTRICAL CONNECTION
ADAPTING THE HOB TO ANOTHER TYPE OF GAS
This operaon may only be carried out by an appropriately authorised er.
If the gas the hob is to be supplied with diers from the gas provided for the hob by the manufacturer, that is G25/ 25.3 / 25 mbar,
burner nozzles must be exchanged and the ame needs to be adjusted.
In order to adapt the hob to burn a dierent type of gas, you should:
• exchange the nozzles (see the gas tables below);
• adjust the “economical” ame.
The hobs provided by the manufacturer have burners which are factory-adapted to use the gas specified on their
rating labels.

G25/ 25.3-25 mbar* G20/20 mbar G30/30 mbar
SABAF burners
Injector
diameter Injector mark Injector
diameter Injector mark Injector
diameter Injector mark
1 0.72 mm 72 0.72 mm 72 0.50 mm 50 1 Simmer burner 0.95 kW
2 0.97 mm 97 0.97 mm 97 0.65 mm 65 2 Semi-rapid burners 1.70 kW
3 1.15 mm 115 1.15 mm 115 0.85 mm 85 1 Rapid burner 2.90 kW
Burner ame Re-arming from liquid gas to natural gas Re-arming from natural gas to liquid gas
Full 1. Exchange a burner nozzle for the appropriate type
according to the gas table.
1. Exchange a burner nozzle for the appropriate type
according to the gas table.
Economical 2. Unscrew an adjusng bolt slightly and adjust the ame size. 2. Screw in an adjusng bolt slightly and check the ame size.
In order to perfom adjusng operaons, take o the knobs.
• Check that the voltage in your home corresponds with the voltage printed on the boom of the appliance.
• The earthing of the appliance is compulsory by law.
•  the connecon point must always be accessible.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tomado TGH6001W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tomado TGH6001W in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 7,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info