485747
8
Zoom out
Zoom in
Previous page
1/24
Next page
GB
8
Toledo
Disassembly
Remove the flange nut and the flange from •
the spindle (2).
Remove the machine’s protective hood.•
Assembly
Put the protective hood (1) on the machine.•
Turn the protective hood to the position •
indicated in the drawing and completely
tighten the screws (3).
Put the flange nut and the flange back on the •
spindle (2).
Mounting a grinding disc
Fig. C
Use grinding discs of the correct dimension. •
Use fibre reinforced grinding discs only. The
grinding disc must not touch the edge of the
guard.
Press the spindle lock and turn the spindle (9) •
until it engages in the lock. Keep the spindle
lock pressed during this procedure.
Remove the flange nut (12) from the spindle •
using the spanner (11).
Position the grinding disc (7) on the flange (5).•
Place the flange nut on the spindle an tighten •
it using the spanner.
Release the spindle lock and check that the •
spindle is unlocked by rotating it.
Mounting the side handle
Fig. A
The side handle can be used for both left-•
hand and right-hand control.
Fasten the side handle (Fig. A-3) for left-hand •
operation on the right-hand side of the
machine.
Fasten the side handle for right-hand •
operation on the left-hand side of the
machine.
Makesurethatthesidehandleis
fastenedproperlyandcannotloosen
unexpectedly.
4. USE
Alwaysobservethesafetyinstructions
andapplicableregulations.
Wearearandeyeprotection
Do not place the machine on the workpiece when
switching the machine on or off. The grinding disc
may damage the workpiece.
Clamp the workpiece and make sure that the •
workpiece cannot slide from under the
machine during the cutting activities.
Hold the machine firmly and press it under an •
angleofapproximately15˚againstthe
workpiece. Move the grinding disc evenly
across the workpiece.
Regularly inspect the grinding disc. Worn •
grinding discs have a negative effect on the
efficiency of the machine. Replace a grinding
disc on time.
Always switch off the machine first before •
removing the plug from the wall socket.
Switching on and off
This machine in equipped with a safety switch and
needs to be unlocked before operation.
Press at the bottom of the switch to unlock the •
on/off switch.
Slide the on/off switch forwards.•
To switch off, depress the on/off switch, this •
will then jump to the ‘off’ position.
Do not put the machine down when the motor •
is still running. Do not place the machine on a
dusty surface. Dust particles may enter the
mechanism.
Neverusethespindlelocktostopthe
motor.
Neverusethemachineforgrinding
magnesiumworkpieces.
5. SERVICE & MAINTENANCE
Makesurethatthemachineisnotlive
whencarryingoutmaintenanceworkon
themotor.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toledo TEAG-115-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toledo TEAG-115-500 in the language / languages: English, German as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info