Manual Toledo TEAG-115-500 (page 7 of 24) (English, German)

485747

Zoom out

Zoom in

1/24

Toledo

Special safety instructions

Check that the maximum speed indicated on •

the grinding disc corresponds to the maximum

speed of the machine. The speed of the

machine must not exceed the value on the

grinding disc.

Make sure that the dimensions of the grinding •

disc correspond to the specifications of the

machine.

Make sure that the grinding disc has been •

mounted and fastened properly. Do not use

reducing rings or adapters to make the grinding

disc fit properly.

Treat and store grinding discs in conformance •

with the supplier’s instructions.

Do not use the machine for grinding workpieces •

with a maximum thickness exceeding the

maximum grinding depth of the grinding disc.

Do not use grinding discs for deburring.•

When grinding discs have to be mounted on the •

thread of the spindle, make sure that the spindle

has sufficient thread. Make sure that the spindle

is sufficiently protected and does not touch the

grinding surface.

Before use, inspect the grinding disc for any •

damage. Do not use grinding discs which are

crack-ed, ripped or otherwise damaged.

Before use, let the machine run idle for 30 •

seconds. Immediately switch off the machine in

case of abnormal vibrations or occurrence of

another defect. Carefully inspect the machine

and grinding disc before switching the machine

on again.

Make sure that sparks do not put people into •

danger or that they contact highly flammable

substances.

Make sure that the workpiece is sufficiently •

supported or clamped. Keep your hands away

from the surface to be cut.

Always wear safety goggles and hearing •

protection. If desired or required also use

another kind of protection like for example an

apron or helmet.

Ensure that mounted wheels and points are •

fitted in accordance with the manufacturer’s

instructions.

Ensure that blotters are used when they are •

provided with the bonded abrasive product and

when they are required.

If a guard is supplied with the tool never use the •

tool without such a guard.

For tools intended to be fitted with threaded hole •

wheel, ensure that the thread in the wheel is

long enough to accept the spindle length.

Ensure that ventilation openings are kept clear •

when working in dusty conditions. If it should

become nessesary to clear dust, first disconnect

the tool from the mains supply (use non metallic

objects) and avoid damaging internal parts.

Though poor conditions of the electrical mains, •

shortly voltage drops can appear when starting

the equipment. This can influence other

equipment (eq. blinking of a lamp). If the mains-

impedance Zmax <0.348 Ohm, such

disturbances are not expected. (In case of need,

you may contact your local supply authority for

further information.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Keep these instructions in a safe place!

Alwayscheckthatthepowersupply

correspondstothevoltageontherating

plate.

ClassIImachine–Doubleinsulation–

Youdon’tneedanyearthedplug.

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm

. When using a cable

reel always unwind the reel completely.

3. ASSEMBLY

Priortomountinganaccessoryalways

unplugthetool.

Removing and mounting the guard

Fig. B

Replace the guard only with one of sheet steel or

material of equal strength.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toledo TEAG-115-500 in the language / languages: English, German as an attachment in your email.

The manual is 2,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toledo TEAG-115-500 Manual

Product: