631461
20
Zoom out
Zoom in
Previous page
1/30
Next page
19
5. COMMON OPERATION
1. To turn the unit on/off.
In power off mode, press any button except RELEASE button to turn on the unit. In power on mode, long press
the POWER button to turn off the unit.
2. To select function mode
Press MODE button to change function mode as follows: -->TUNER -->USB -->CARD -->BT-->AUX.
When there is no media (USB/CARD), that mode will be skipped.
3. To adjust the volume level: rotate VOLUME knob to adjust volume level during playback.
4. To mute or resume sound: press MUTE to cut the sound, press again to resume sound immediately
during playback. To resume the sound immediately, you can also turn VOLUME knob.
5. To set sound mode and menu
1) Sound settings: Press SEL button shortly and repeatedly to select the following modes: VOL (volume),
BASS (without preset DSP), TRE (treble)(without preset DSP), BAL(balance) and FAD (fader) in the
sequence and circulation. In each mode, the waiting time is about 5 seconds, and when the waiting time is over,
it will return to the last display mode. After selecting a sound mode, use volume control to set level of the
selected sound mode.
2) To set menu
: Press SEL button and hold for more than 2 seconds to turn on TA ON/OFF mode, then press
SEL button shortly and repeatedly to select following options :
AF ON/OFF
TA SEEK/TA ALARM
PI SOUND/PI MUTE,
RETUNE L/RETUNE S
MASK DPI/MASK ALL
BEEP ON/BEEP OFF
USER SET (FLAT/CLASSIC/ROCK/POP)
EUROPE/AMERICA
VOL LAST/VOL DEFA
STEREO/MONO (in FM mode)
LOUD OFF/LOUD ON
DX/LOCAL (in FM mode)
CLK ON/CLK OFF
CLK 12/24 mode.
After selecting the desired mode, rotate the VOLUME button to select one setup item of the desired mode.
(1) TA SEEK/TA ALARM:
TA SEEK mode: when newly tuned station does not receive TP information for 5 seconds, the radio retunes to
next station which has not the same station(PI) as the last station, but has the TP information. When TP
information gets lost at the current station for retune time which is set by RETUNE SHORT (60 seconds) or
RETUNE LONG (90 seconds), the radio start to retune to next same PI station. When same PI station is not
received in 1 cyclic search, the radio retunes to next station with TP information.
TA ALARM mode: when this mode is selected, any automatic retune mode is not activated. Only double beep
sound (ALARM) is out-put. When newly tuned station does not have TP information for 5 seconds, beeps are
sounded. When TP information gets lost at the current station for retune time which is set by RETUNE SHORT
(60 seconds) or RETUNE LONG (90 seconds), the radio start to retune to next same PI station. When same PI
station is not received in 1 cyclic search, the radio retunes to next station with TP information. When TP
information gets lost at the current station for retune time, the beep sound is out-putted. When newly tuned
station has no RDS signal, PI SEEK may be suppressed.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tokai LAR-91B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tokai LAR-91B in the language / languages: English, French as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info