474125
17
Zoom out
Zoom in
Previous page
1/36
Next page
3. If the message STIR appears on the display window durnig cooking, open the oven door, using
oven mitts, perform the appropriate steps indicated on the package, ie. stir, turn, uncover, etc.
Close the door, and press START to resume the cooking program.
4. At the end of the cooking time, the oven will beep four times and the time of day will reappear
in the display window. Press the door release to open the door and using oven mitts, remove
the food.
If the oven does NOT find the barcode in its database:
If the oven does not find the barcode in its database, the message NOT IN MEMORY appears
on the display window.
Why Does NOT IN MEMORY Appear in the Display Window?
Your Beyond Microwave Oven comes pre-programmed with thousands of cooking directions for
national brand microwave foods. However, your oven may not recognize the barcodes for new,
regional, private label, store, or distributor foods. When you scan a barcode that your oven
does not recognize, NOT IN MEMORY appears in the display window. Your oven saves a list of all
unrecognized barcodes.
If you have a Home Hub, it will connect to the Home Hub Network each evening to search for cook-
ing programs for any NOT IN MEMORY barcodes that you have scanned that day. If the barcodes are
in the larger Home Hub Network database, your Home Hub retrieves them and adds them to your
oven’s memory. So, the next time you scan the food that was previously NOT IN MEMORY your oven
will be able to recognize the barcode and program itself with the proper cooking instructions.
You may also use your oven’s Learn function, explained in the following section, to “teach”
your oven to recognize new barcodes and to learn new cooking programs.
Either way, the more you use your Beyond Microwave Oven, the smarter it gets!
Using the Learn Function
When you scan a barcode that’s not already in the oven’s database, the message NOT IN MEMORY
appears on the display window. If this happens, you can use the Learn function to manually enter
and save the required cooking program to the oven’s database. This will allow your oven to recog-
nize the barcode in future uses.
Refer to package directions or the recommended cooking power level guidelines in the chart on
page 22.
Manually Adding a New Cooking Program to the Ovens Memory:
1. Press LEARN. The red light at the end of the scanning wand will illuminate.
2. Scan the barcode on the package. (Please refer to Figure 4 for scanning procedure.)
3. Press the Power button to select the power setting. P 10 will appear in the display window.
Pressing POWER repeatedly will reduce the power setting one level at a time from
P 10 (hightest) to P 1 (lowest).
4. Enter the desired cooking time by pressing the digits on the number pad.
If Two Stage Microwave cooking is required, enter the second power level and cooking time.
If it is necessary to perform any step such as stir, turn, uncover etc., it will be necessary to
manually stop the oven at the appropriate time and do so. It is not possible to program in
a pause (stir) feature using the Learn Feature.
5. Press the LEARN button to save the cooking program.
The next time you scan another package of the same food, the oven will recognize the barcode and
automatically program itself to cook the food according to the instructions that you entered.
17
Beyond Microwaving
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toastmaster WBYMW1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toastmaster WBYMW1 in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info