692130
9
Zoom out
Zoom in
Previous page
1/60
Next page
9
17
18
19
20
21
22
15
16
15. Input level indicators [–40 dB, 0 dB, PEAK]
(Green, red)
Light green depending on the input signal level.
(Peak indicator lights red.)
Input level indicates the pre-fader level value.
Adjust the input gain when the PEAK indicator
remains lit. (See p. 16, "PHANTOM POWER,
PAD, AND GAIN SETTINGS.")
16. Low cut switch and Low cut indicator
[LOW CUT] (Green)
The indicator lights when the switch is pressed
andtheinternallowcutlterisenabled.
Cutofffrequency:100Hz*
* Itcanbeadjustedintherangeof20Hzto20
kHz using the supplied M-864D PC Software.
(See the M-864D Software instructions.)
17. Feedback Suppressor switch and Feedback
suppressor indicator [FBS] (Green)
The Feedback Suppression function is enabled
when this switch is pressed, and the indicator
lights. (See p. 27.)
18. Tone/Gain selection switch and Tone/Gain
control mode indicator [TONE/GAIN] (Green,
orange)
Each time the switch is pressed, the mode
switches among Standby mode, Tone control
mode, and Gain control mode.
The indicator goes off in Standby mode, lights
green in Tone control mode, and lights orange in
Gain control mode.
19. Assignment switches and Assignment
indicators [ASSIGN 1 – 4] (Green)
Used to select the output destination of the post-
fader signals adjusted by the monaural input
volume fader (22) of each channel.
The corresponding indicator lights when the
switch is pressed, and the monaural input (1
through 8) signal is output to the corresponding
bus (1 through 4).
20. Protective cover (accessory)
Used to protect settings such as Low cut switch
(16) and Assignment switch (19) settings.
21. Input name label attaching space
Afxthelabelwiththeprintedinputname.
22. Monaural input volume fader [INPUT 1 – 8]
Adjusts the monaural input volume level.
The volume level increases by moving up the
fader, and decreases by moving it down.
• Section B
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toa M-864D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toa M-864D in the language / languages: English as an attachment in your email.

The manual is 6,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info