692129
15
Zoom out
Zoom in
Previous page
1/24
Next page
15
9.3. Speaker Output Signal Connections
9.3.1. High-impedance 100 V line speaker connections
9.3.2. High-impedance 70 V line speaker connections
9.3.3. Low-impedance speaker connections
The unit can be connected to high- or low-impedance speakers. Class 2 wiring may be used.
Using the supplied Large type removable terminal plug (5 pins), connect the speaker line to any pair of terminals
from among the following three combinations.
Also, perform the impedance setting using Switch 4 of the DIP switch.
1 2 3 4
2
3
1
A-5006/5012
Switch 4 is factor-preset to
UP position.
Speaker output terminals
(1) High-impedance 100 V line
(2) High-impedance 70 V line
(3) Low-impedance (4 Ω)
[DIP Switch setting]
Low-Impedance
High-Impedance
1 2 3 4
1 2 3 4
4: DOWN
4: UP
[For A-5012] [For A-5006]
Total wattage: 120 W or less
Total impedance: 83 Ω or more
Total wattage: 60 W or less
Total impedance: 170 Ω or more
[For A-5012] [For A-5006]
Total wattage: 120 W or less
Total impedance: 42 Ω or more
Total wattage: 60 W or less
Total impedance: 83 Ω or more
[For A-5012] [For A-5006]
Impedance: 4 to 16 Ω
Rated input of speaker: 120 W or more
Impedance: 4 to 16 Ω
Rated input of speaker: 60 W or more
Note: Avoid using multiple paired terminal
combinations, as this could result in
unit failures.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toa A-5012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toa A-5012 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info