692129
22
Zoom out
Zoom in
Previous page
1/24
Next page
22
13. SPECIFICATIONS
Model No. A-5006 A-5012
Power Source 100 – 240 V AC, 50/60 Hz
Rated Output 60 W 120 W
Power Consumption 106 W (rated output),
20 W (based on cULus standards)
207 W (rated output),
39 W (based on cULus standards)
Current Consumption Max. 2 A Max. 3 A
Frequency Response 50 Hz – 20 kHz (1/8 rated output)
Distortion 1% or less (1 kHz, rated output)
Input INPUT 1, 2 MIC: –60 dB*/LINE: –20 dB* (MIC/LINE selectable)
2.2 kΩ, electronically-balanced, removable terminal block (5 pins)
INPUT 3, 4 LINE: –20 dB*, 10 kΩ, unbalanced, RCA pin jack
Output SPEAKER 4 Ω, 70 V (83 Ω), 100 V (170 Ω),
removable terminal block (5 pins)
4 Ω, 70 V (42 Ω), 100 V (83 Ω),
removable terminal block (5 pins)
Signal to Noise Ratio MIC 1, 2: 50 dB or more, LINE 1 – 4: 70 dB or more (A-weighted)
Function Equalizer: 5 points settable on each input (High-pass lter x 1, Parametric equalizer x 4)
HPF: 20 Hz – 20 kHz (6 dB/oct)
PEQ: 20 Hz – 20 kHz ± 15 dB, Q: 0.267 – 69.249
FBS: ON/OFF settable on inputs 1 and 2 (OFF by default)
Compressor: ON/OFF settable on inputs 1 and 2 (OFF by default)
Threshold, Ratio, Attack time, Release time, and Gain are settable
independently on each input.
Mute: MANUAL/AUTO/OFF settable on each input (MANUAL by default)
Reduction level, Hold time and Fade-in time are settable independently on
each input.
Trigger threshold is settable independently on input 1. (AUTO)
Equalizer: 10 points settable on output. (Through, Low-pass lter, Parametric equalizer,
High-pass lter)
LPF: 20 Hz – 20 kHz (6 dB/oct)
LPF: 20 Hz – 20 kHz (12 dB/oct)
PEQ: 20 Hz – 20 kHz ± 15 dB, Q: 0.267 – 69.249
HPF: 20 Hz – 20 kHz (6 dB/oct)
HPF: 20 Hz – 20 kHz (12 dB/oct)
Speaker Parametric equalizer: 5 points settable on output
20 Hz – 20 kHz ± 15 dB
Q: 0.267 – 69.249
Control
Mute control, Remote master volume control, Power ON/OFF switch, Ground lift
LED Indicator Power indicator, Signal indicator, Peak indicator, Protect indicator
Network I/F 100BASE-TX
Operating Temperature 0 to 40 °C (32 to 104 °F)
Operating Humidity 35 to 80 %RH (no condensation)
Finish Panel: PS resin, black
Case: Surface-treated steel plate, black, paint
Dimensions 210 (w) x 52.5 (h) x 375 (d) mm (8.27" x 2.07" x 14.76")
Weight 3.6 kg (7.94 lb) 3.9 kg (8.6 lb)
* 0 dB = 1 V
Note: The design and specications are subject to change without notice for improvement.
•Accessories
CD (setting software) ............................................... 1
Large type removable terminal plug (5 pins) ........... 1
Small type removable terminal plug (5 pins) ........... 2
Machine screw M3 x 10 ............................................ 6
Plain washer (for M3) ............................................... 6
Power supply cord (2 m or 6.56 ft) ......................... 1
•Optionalproducts
Half width blank panel: MB-15B-BK (for rack mounting 1 unit)
Rack joint bracket: MB-15B-J (for rack mounting 2 units)
Rack runner: YA-706
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toa A-5012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toa A-5012 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info