692129
8
Zoom out
Zoom in
Previous page
1/24
Next page
8
5. HANDLING PRECAUTIONS
The supplied power cord is designed to be used exclusively with the unit. Do not connect it to any other
equipment.
Install the unit in locations where the temperature is between 0 and 40 °C (32 and 104°F) and the moisture is
between 35 and 80% (no dew condensation must be formed).
The unit is a precision audio component. To prevent failure, avoid locations where the unit may be exposed
to strong shocks or vibrations.
To clean, be sure to rst switch off the unit’s power, then wipe with a dry cloth. Never use benzene, thinner,
alcohol, or chemically-treated cleaning cloth because such volatile liquids could deform or discolor the unit.
6. INSTALLATION PRECAUTIONS
Be sure to install and connect the unit before the connection to the AC mains outlet. Remove the unit’s power
supply cord from the AC mains outlet when uninstalling or disconnecting the unit.
The socket-outlet shall be installed near the unit and the plug shall be easily accessible.
Ensure that the unit is located at least 10 cm (3.94") away from ceiling and wall surfaces, as shown in the
gure below, to allow adequate cooling and thus prevent extreme increases in temperature inside the unit.
Also, do not place any other devices within that range.
Over 10 cm
(3.94")
Over 10 cm
(3.94")
Over 10 cm
(3.94")
3. GENERAL DESCRIPTION
The A-5006/5012 is a compact desktop integrated Mixer Amplier with a 4-input/1-output conguration. The
4 inputs include an assortment of line and microphone inputs. The unit is equipped with a terminal that allows
remote control of overall sound volume. Signal processing, including equalization and compression, can be
performed using the supplied A-5000 PC Software.*
The unit can also be easily mounted in an EIA-standard equipment rack with the additional purchase of optional
rack mounting hardware. Horizontal connectivity permits two mixer ampliers to be simultaneously mounted in
a one-unit size rack space.
* Recorded on the supplied CD.
4. FEATURES
The input sensitivity of Inputs 1 and 2, and impedance of the speaker outputs are set by way of a DIP switch
located on the unit’s rear panel.
The input sensitivity of Inputs 1 and 2 can be independently set to either MIC or LINE signal level. Inputs 3
and 4 are xed at LINE level.
Speaker outputs can be set for either low or high impedance connections.
A manual muting function and a remote master volume control function allow remote adjustment of the sound
volume.
The unit is equipped with the LAN port, making it possible to perform the unit’s settings using the A-5000
PC Software. Functions that can be set include an input equalizer, output equalizer, compressor and master
volume.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toa A-5012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toa A-5012 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info