628559
29
Zoom out
Zoom in
Previous page
1/136
Next page
Connecting the telephone system
29
Connection your telephone system to mains
Connect your telephone system to mains by using the AC adaptor.
The "power" LED at your telephone system will start flashing. Different LEDs will come
on and off. The "power" LED will flash for some 90 seconds. After that it should be lit
permanently.
By all means wait that long. Only after that the telephone system will be in operation.
Testing the connection
Programme your connected ISDN or system telephones where applicable with the
corresponding telephone numbers (MSNs). Default setting in the telephone system is
20 and 21 at S
0
2.
Now, pick up the handset at all telephones one after the other. You will hear a dial
tone. When there is no dial tone please check the connection of the telephone with
no tone.
Now, dial at one of the telephones all internal telephone numbers of the other tele-
phones connected to the telephone system. Each telephone should ring.
Note: With the analogue extensions telephone numbers 50 - 58 are factory
programmed. At the second S
0
port for ISDN or system telephones this
is 20 and 21. In case you have set the first S
0
port to internal, before us-
ing any telephones at this port a configuration in the telephone system
is needed.
If an ISDN or system telephone does not ring but you get a dial tone when picking up
the handset you have not programmed the internal telephone number to the tele-
phone which is valid for the corresponding S
0
port of the telephone system.
When this test was successful at the connected telephones please dial a 0 (zero) fol-
lowed by an external telephone number. A connection will be set up to the dialled
subscriber. If external connections do work from analogue terminal devices but do
not work from ISDN or system telephones and after dialling the first digit of the exter-
nal telephone number a busy signal, you have not programmed the internal tele-
phone number to the telephone which is valid for the corresponding S
0
port of the
telephone system.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tiptel 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tiptel 810 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tiptel 810

Tiptel 810 Quick start guide - English - 40 pages

Tiptel 810 User Manual - English - 32 pages

Tiptel 810 User Manual - German - 33 pages

Tiptel 810 Quick start guide - German - 40 pages

Tiptel 810 User Manual - German - 49 pages

Tiptel 810 Quick start guide - Dutch - 40 pages

Tiptel 810 Installation Guide - Dutch - 108 pages

Tiptel 810 Additional guide - Dutch - 3 pages

Tiptel 810 User Manual - Dutch - 36 pages

Tiptel 810 User Manual - French - 32 pages

Tiptel 810 Quick start guide - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info