628559
28
Zoom out
Zoom in
Previous page
1/136
Next page
Connecting the telephone system
28
Connection of IP telephones
In telephone system's configuration you must first set up a subscriber, in whose set-
tings und "Designation of extensions" the item "SIP Proxy Port" must be activated. In
order to be able to use an IP telephone at the subscriber's end a password must be
set.
In the configuration of the IP telephone as registrar the IP address of the telephone
system, and as port the SIP proxy port (factory default is 5062) set in the telephone
system must be used. As SIP ID or user name the internal telephone number of the
subscriber and as password the password of the subscriber has to be set.
After saving those settings the IP telephone will register with your telephone system
as telephone.
Connecting the telephone system to the network
Take the attached network cable. Connect one end to a free LAN connector (next to
the cable of your PC) of your router/switch/hub. Connect the other end to the
shielded LAN connector of your telephone system. In case you should not use any
internet connection or router, you should connect the network cable directly to the
LAN connector of your PC.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tiptel 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tiptel 810 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tiptel 810

Tiptel 810 Quick start guide - English - 40 pages

Tiptel 810 User Manual - English - 32 pages

Tiptel 810 User Manual - German - 33 pages

Tiptel 810 Quick start guide - German - 40 pages

Tiptel 810 User Manual - German - 49 pages

Tiptel 810 Quick start guide - Dutch - 40 pages

Tiptel 810 Installation Guide - Dutch - 108 pages

Tiptel 810 Additional guide - Dutch - 3 pages

Tiptel 810 User Manual - Dutch - 36 pages

Tiptel 810 User Manual - French - 32 pages

Tiptel 810 Quick start guide - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info