516096

Thomson VMD20 Manual

82
Zoom out
Zoom in
Previous page
1/104
Next page
80 EN
TROUBLESHOOTING
(cont.)
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
10.
Snapshot mode cannot be
used.
11.
The colour of Snapshot
looks strange.
12.
Although Snapshot is
attempted, flash does not
take place.
13.
Although a Snapshot is
taken with the flash, Red-
Eye Reduction does not
take place.
14.
The image taken using
Snapshot is too dark.
10.
•The Squeeze mode is
selected.
•High Speed Recording is
being attempted.
11.
•The light source or the
subject does not include
white. Or there are various
different light sources
behind the subject.
12.
•The subject is too bright
with the flash set to “AUTO”
or “AUTO ”.
•If blinks, the flash is
being charged.
•Multi-Analyser 4 or Multi-
Analyser 9 is selected.
•The camcorder is in the
Record mode.
•In the Menu Screen, “GAIN
UP” is set to “OFF” or “P.AE/
EFFECT” is set to “TWI-
LIGHT”.
•The flash is pushed down.
13.
•The subject does not look
straight toward the flash.
•The subject does not look at
the first flash, which is an
important part of Red-Eye
Reduction.
•The camcorder is too far
from the subject.
•“FLASH” is not set to
“AUTO ” in the Menu
Screen.
14.
•The flash is pushed down.
•The flash emission window
is covered by fingers, etc..
•The flash brightness is set to
produce a darker image
(adjustment value: –3).
•The camcorder is too far
from the subject.
•Shooting was performed
under backlit conditions.
10.
•Disengage the Squeeze
mode (੬ pg. 32).
•Do not use High Speed
Recording (੬ pg. 28).
11.
•Set “FLASH” to “ON” in the
Menu Screen. Or find a
white subject and compose
your shot so that it also
appears in the frame
(੬ pg. 18, 20, 34).
12.
•Set “FLASH” to “ON” in the
Menu Screen (੬ pg. 34).
•It can take up to 10 seconds
to charge the flash.
•Disengage Multi-Analyser 4
or Multi-Analyser 9
(੬ pg. 19).
•Set the camcorder in the
Record-Standby mode
(੬ pg. 34).
•Set “GAIN UP” to
“AUTO ” or “AGC”
(੬ pg. 31) or disengage the
“TWILIGHT” mode
(੬ pg. 41).
•Raise the flash using the
FLASH OPEN Switch
(੬ pg. 34).
13.
•The subject should look
straight toward the flash,
especially the first flash. If
the subject does not see the
first flash, it will be difficult
for Red-Eye Reduction to
take place (੬ pg. 34).
•The flash is effective for
subjects at a distance of
approx. 0.7 m to 2 m from
the camcorder (੬ pg. 34).
•Set “FLASH” to “AUTO ”
in the Menu Screen to
display the Red-Eye
Reduction indicator
(੬ pg. 34).
14.
•Raise the flash using the
FLASH OPEN Switch
(੬ pg. 34).
•Do not cover the flash
emission window.
•Adjust the flash brightness to
a larger value (੬ pg. 35).
•The flash is effective for
subjects at a distance of
approx. 0.7 m to 2 m
(੬ pg. 34).
•Press the BACKLIGHT
Button (੬ pg. 42).
Downloaded from www.Manualslib.com manuals search engine
… 82 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson VMD20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson VMD20 in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info