516095
87
Zoom out
Zoom in
Previous page
1/104
Next page
EN85
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
45.
The LCD monitor, the
viewfinder and the lens
have become dirty (ex.
fingerprints).
46.
An unusual mark appears.
47.
An error indication
(E01 E06) appears.
48.
The charger indicator on
the AC Power Adapter/
Charger does not light.
49.
Picture does not appear on
the LCD monitor.
50.
When the image is printed
from the printer, a black
bar appears at the bottom
of the screen.
51.
When the camcorder is
connected via the DV
connector, the camcorder
does not operate.
52.
During transport, the lens
cover opens.
45.
————
46.
————
47.
A malfunction of some kind
has occurred. In this case
the camcorders functions
become unusable.
48.
The temperature of the
battery is extremely high/low.
Charging is difficult in
places subject to extremely
high/low temperatures.
49.
The viewfinder is pulled
out.
The LCD monitor's
brightness setting is too
dark.
50.
This is not a malfunction.
51.
The DV cable was plugged/
unplugged with power
turned on.
52.
————
45.
Wipe them gently with soft
cloth. Wiping strongly can
cause damage ( pg. 92).
46.
Check the section of the
manual that explains LCD
monitor/viewfinder
indications ( pg. 88 91).
47.
Remove the power supply
(battery pack, etc.) and wait a
few minutes for the indication
to clear. When it does, you
can resume using the
camcorder.
If the indication remains even
though you repeat the above
two or three times, please
consult your nearest
THOMSON dealer.
48.
To protect the battery, it is
recommended to charge it
in places with a temperature
of 10°C to 35°C ( pg. 93).
49.
Push the viewfinder back in.
Adjust the brightness of the
LCD monitor ( pg. 16).
If the monitor is tilted
upward 180 degrees, open
the monitor fully ( pg. 16).
50.
By recording with DIS
activated ( pg. 32) this
can be avoided.
51.
Turn the camcorders power
off and on again, then
operate it.
52.
Do not subject the
camcorder to shock or
excessive vibration during
transport.
Turn the camcorder on and
off. The lens cover closes.
Downloaded from www.Manualslib.com manuals search engine
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson VMD10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson VMD10 in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info