516095

Thomson VMD10 Manual

86
Zoom out
Zoom in
Previous page
1/104
Next page
84 EN
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
36.
Coloured bright spots
appear all over the LCD
monitor or the viewfinder.
37.
During recording, sound
cannot be heard.
38.
Play, Rewind and Fast-
Forward functions do not
work.
39.
A MultiMediaCard cannot
be played back.
40.
The tape is moving, but
there is no picture.
41.
The LCD monitor image is
distorted.
42.
Images on the LCD
monitor are jittery.
43.
For VMD20 owners: There
is no playback picture on
the connected TV.
44.
Blocks of noise appear
during playback, or there is
no playback picture and
the screen becomes blue.
36.
•The LCD monitor and the
viewfinder are made with
high-precision technology.
However, black spots or
bright spots of light (red,
green or blue) may appear
constantly on the LCD
monitor or the viewfinder.
These spots are not recorded
on the tape. This is not due to
any defect of the unit.
(Effective dots: more than
99.99 %)
37.
•The optional headphones are
not connected to the
headphones connector.
•The sound volume of the
headphones connector was
not adjusted appropriately.
The sound volume at this
point is the same as the level
it was adjusted to during
playback.
38.
•The Power Switch is not set
to “ ”.
39.
• The Power Switch is set to
“ ”, “ ” or “ ”.
40.
•Your TV has AV input
terminals, but is not set to its
VIDEO mode.
•The cassette holder cover is
open.
41.
•During playback of the
unrecorded portion, High-
speed Search and still
playback, LCD monitor
indications appear distorted.
This is not a defect.
42.
•The speaker volume is too
great.
43.
•Since the analogue input
mode is engaged, the
camcorder is in the Record-
Standby mode.
44.
————
36.
————
37.
•Connect the optional
headphones to the head-
phones connector
(੬ pg. 86, 87).
•Adjust the sound volume
during playback (੬ pg. 44).
38.
•Set the Power Switch to
“ ” (੬ pg. 44).
39.
•Set the Power Switch to
“ ” (੬ pg. 48).
40.
•Set the TV to the mode or
channel appropriate for
video playback (੬ pg. 58,
59).
•Close the cassette holder
cover (੬ pg. 10).
41.
————
42.
•Turn the speaker volume
down (੬ pg. 44).
43.
•Set “AV/S-VIDEO” to “OFF”
in the Menu Screen
(੬ pg. 46).
44.
•Clean the video heads with
an optional cleaning
cassette (੬ pg. 94).
TROUBLESHOOTING
(cont.)
Downloaded from www.Manualslib.com manuals search engine
… 86 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson VMD10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson VMD10 in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info