475000
14
Zoom out
Zoom in
Previous page
1/23
Next page
MAIN MENU
P11
English
7.1.4 Satellite Edit
Here you can edit transponder data or add a new satellite.
On the left of the screen, a list with all available satellites is displayed. The right of the screen
displays a list will all available transponders for the highlighted satellite.
ADDING OR EDITING A TRANSPONDER
Use
pq to highlight the desired satellite. Press u to move the highlight to the transponder
list. Press YELLOW to add a transponder or use
pq to highlight the transponder to be edited
and then press BLUE to enter the edit screen. Use
pq to navigate in the edit screen and use
tu respectively 0~9 to change the settings. Once all settings are made, press GREEN to
save or EXIT to quit without saving.
EDITING AN EXISTING SATELLITE
Use
pq to highlight the satellite you wish to edit. Press BLUE to go to the Satellite Edit
screen. To edit the name of the satellite, use
pq to highlight the name and press OK. A
keyboard will pop up. Use
pq tu to navigate and OK to input the chosen character. Once
finished press GREEN to save the changes or EXIT to quit without saving. To edit the position
of the satellite, use
pq to move the highlight to Position and use the 0~9 buttons to input the
new position. To change the location, use
pq to highlight Location and use tu to change
the location. Possible settings are: East and West. Once all settings are made press GREEN to
save or EXIT to quit without saving.
ADDING A SATELLITE
To add a satellite, make sure the highlight is not in the transponders list (press
t in case of
doubt) and press YELLOW. The procedure for adding a satellite is the same as for editing
a satellite.
7.2 Setup
Use the Setup menu to configure the system settings of your receiver. The following sub-menus
are available: Language, Output Options, Time Setting, Parental Control and OSD Display.
Choose the desired submenu with
pq and press OK to advance.
7.2.1 Language
Here you can set the preferred Display, Audio and Subtitle languages and Country setting.
Use
pq to highlight the setting you wish to change and tu to change the value of the
highlighted setting. Press OK for a list with all available options for the chosen setting.
Display: This setting affects the menu language of your receiver. All menu’s
and messages will be displayed in this language.
Audio: is the preferred audio language. The receiver will automatically
switch audio to the preferred language whenever available.
Subtitle: Whenever available, subtitles will be displayed in the
selected language.
Country: Here you can set your country of residence.
Once all settings are made, press EXIT to leave the Language menu. A confirmation banner will
be shown. Press OK to save your settings or EXIT to discard.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson TSR600CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson TSR600CI in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson TSR600CI

Thomson TSR600CI User Manual - German - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info