480548
13
Zoom out
Zoom in
Previous page
1/19
Next page
P10
MAIN MENU
5.3.5 Timer Setting
Use this menu to setup programme timers or sleep timers.
Programme timer
Timer Number: You can set up to 8 timers
Timer Mode: Off/Once/Daily/Weekly/Monthly
Timer Service: TV Service/Radio Service
Wake-up Channel: You can select any channel as wake-up channel.
Month/Date/Day: Use p/q to select the start month, date and day.
Time: Press OK to input the time with the numeric buttons.
When you leave the programme timer, a saving window appears.
Use t/u to select Yes in the confirmation window and press OK to
save your settings or No to cancel.
Duration: Press OK to input the timer duration with the numeric buttons.
Auto Record: When set to On, the receiver will record the timed event on the connected
USB device. Select Off to disable automatic recording of the event.
Sleep Timer
You can set the receiver to power OFF in 10 min, 30min, 60min, 90min and 120min automatically.
5.3.6 OSD Setting
This menu allows you to change settings for: Subtitle Display, OSD and Transparency. You can
also restore the default OSD settings here.
Subtitle Display: To set the subtitle to Standard or OFF.
OSD Transparency: To set the OSD transparency from Off ~ 50%.
OSD Timeout: To define how long the information banner is to be shown (5S~10S)
Load Default OSD Setting: To clear all OSD settings and reset to default value.
5.3.7 Parental Lock
This menu allows you to protect the installation menu or channels with a password. And you can change
the Password here. When entering the menu you will be asked to input the password (default:0000).
Menu Lock: Locks the installation menu. You can set menu lock to ON/OFF.
Channel Lock: Off/Manual/Age: 4 - Age: 18
New Password: Input your new password here to change the password.
Confirm Password: Input your new password again to confirm the new password.
5.3.8 Auto Standby
This option allows you to enable or disable Auto Standby. The default setting for Auto Standby
is ON. The receiver will switch to standby automatically when it doesn’t receive commands from
the remote control for three hours. To avoid the automatic switch off, set Auto Standby to OFF.
5.4 Tools
Press MENU to enter Main Menu. Select Tools with p/q and press OK to enter.
1. Use p/q to highlight the desired menu and press OK to enter.
2. Press EXIT/SORTIE to leave.
5.4.1 Receiver Information
This menu displays relevant Receiver information like the Receiver Model, Software version,
Build date, and our website www.thomsonstb.net.
1. In Tools menu, select Receiver Information and press OK to open receiver information.
2. Press EXIT/SORTIE to leave.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THT91 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THT91 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info