699585
16
Zoom out
Zoom in
Previous page
1/22
Next page
12
Manual Search Select a particular channel to do a search on just one (known) frequency.
Press OK to start the scan. The signal quality bar might be useful to
check if the frequency is indeed in use.
Country Select the correct country where this receiver is used. If failing to do so, may
result in that channels appear randomly in the channel list, instead of a more
logical order.
Antenna Power Set to On if you use an active antenna. When set to On, 5 V will be present
at the RF in connector of the receiver. Select O for passive antennas.
Scan Mode Select between FTA (Free-To-Air), which will only install Free-to-Air channels
or All, which will install all found channels, even if they are scrambled. Then
select Auto Search or Manual Search and press OK to start scanning.
7.6 Time
Set up your time zone for clock/time in your menu and system.
Time Oset The GMT time can automatically be determined from the incoming TV
broadcast if set to Auto. The time zone is determined from the Country
setting in the Channel Search menu. If set to Manual, you can change the
Time zone yourself in the Time Zone option. Default is Auto.
Time Zone If the correct time cannot be obtained from the incoming TV broadcast,
change the Time Zone setting yourself.
Example: in case of Daylight Saving Time.
Auto Standby As a power saving feature, the unit will switch to Standby automatically, if no
command from the remote control is received for the set time. Options are
1 Hour, 2 Hour, 3 Hour, O. Default is 3 hours.
Power On/O You can set a time to automatically switch On and/or Off the unit every day.
The unit will start on the last watched channel.
Note: Set Auto Standby function to O.
Power On Set to Enable if you want to use the automatically switch On function.
Power On Time Enter the switch On time with the numeric buttons on the remote control.
Power O Set to Enable if you want to use the automatically switch Off function.
Power O Time Enter the switch Off time with the numeric buttons on the remote control.
7.7 Option
Set up the options for languages.
OSD Language Use t u to select the language for the On-Screen Display.
Subtitle Language Set your preference for the subtitle language priority, if available in
broadcast.
Audio Language Set your preference for the audio language priority, if available in broadcast.
Digital Audio Options are: O, PCM, RAW HDMI On, RAW HDMI O
PCM: All audio will be down mixed to a Stereo format on HDMI and S/PDIF
outputs.
RAW HDMI On: Raw audio information will be passed on to the HDMI
output, without down mixing to PCM Stereo, to be passed on to and
processed by a digital amplier or home-theatre set to produce multi-
channel audio.
RAW HDMI O No audio will be forwarded to the outputs.
Audio Description AD. Useful for the visual impaired. If you like to have support of an audio
track that describes the content on screen, select the volume from the AD
audio track. Default is O.
NOTE: Audio Description depends on the broadcaster inserting such an
accompanying audio track.
7.8 System
Setup some system own features for maintenance, network and protection.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THT709 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THT709 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THT709

Thomson THT709 User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info