699739
22
Zoom out
Zoom in
Previous page
1/28
Next page
18
Satellite: Select a satellite to be congured and scanned.
Press RED to scan the selected satellite signal. A window with the scan
progess will be appear.
LNB Power: Set the LNB power On or O.
LNB Type: Select the LNB type. The Universal LNB (09750/10600 MHz) is supported
and is the most common on the market. SatCR is used for SatCR systems.
See information below for more details. It is possible to dene the LNB type
manually by selecting User dened.
LNB Freq (Low/High): Set the frequency of the selected LNB type.
22KHz Tone: Switch the 22KHz oscillator signal to ON (22K) or OFF (0). Refer to
information of Universal LNB.
DiSEqC1.0: Select the correct port of the corresponding LNB.
Available options: O, LNB 1, …, LNB 4
Tone Burst: Set the tone control of your LNB. Available options: O, LNB 1, LNB 2
Transponder: Select one of the available transponders of the chosen satellites in order to
check your reception or align the antenna.
The Signal Strength and Signal Quality indicators on the 2nd half of the
screen will help you to make sure that you get the signal with the selected
parameters, as well as to adjust the antenna if necessary.
SatCR
If a SatCR LNB is used, please refer to the manual of the respective LNB to obtain technical data on
user bands numbers and corresponding frequencies.
Note: SatCR can only work in combination with an optional multi-output (max.
8) satellite splitter and a SatCR LNB, an example is STRONG type SRT L780
(max. 4 users).
Note: SatCR cannot be combined with any other DiSEqC function. SatCR systems
are mainly installed by professional experts.
7.4.2 Channel Search
The channel search procedure from the menu is almost the same as described in First Time
Installation chapter 4.3. This section contains more detailed information on how to add, modify or
update your channel list. In order to view video programmes, you must do a channel search with or
without smartcard in order to install the channel list of your choice. For HD+ channels, rst insert HD+
smartcard at the side panel of the receiver before you start the channel search. Then the receiver will
install the associated channel list of the HD+ bouquet (FTA and encrypted). For FTA channels only or
for channels from other satellites you do not need to insert the HD+ smartcard.
Select the search scheme you wish the wizard to follow:
1. Select HD+ channels to search for channels of the HD+ bouquet (channels numbered 100
and above).
2. Select Preinstalled channels to restore a predened German channel list from the receiver's
memory (channels numbered 1~99).
3. Select Advanced channel search to search for channels on all/selected transponders for the
selected satellite (channels numbered above HD+ bouquet numbers).
Use the pq buttons to select the required search scheme. Use the t u buttons when you want
to change the value or press OK to select it from the list. Use GREEN to perform an HD+ channel
update. Use RED to restore the original HD+ channel list.
Use the 9 button to return to the previous step. Press to exit the menu and to go back to the
viewing mode.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS844 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS844 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS844

Thomson THS844 User Manual - German - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info