699739
21
Zoom out
Zoom in
Previous page
1/28
Next page
English
17
Warning:
- Do not take any action during the update procedure, if the receiver has
not restarted yet or if an error message appears.
- Do not disconnect the receiver from the mains nor switch off until the
software update has been completed.
7.3 Network
Use t u to access the menu Network, which includes the following submenus: RSS, Weather and
Ethernet Cong. Use pq to select the submenu and press OK.
Note: Before you use the network functions of your receiver, please ensure that
it is connected to the Internet. Refer to chapter 3.5 above for more details.
Usually the Internet connection can be established without any problems.
Check the status of your connection in the Ethernet Cong submenu. The
Cable status eld should indicate Plug In and the receiver must obtain a
valid IP address.
7.3.1 RSS (Really Simple Syndication)
This submenu allows you to select the link of RSS news from different sources or to add your own link.
Use pq to highlight a link of your choice and press OK to open it. You can delete (pressing RED),
add a new feed (pressing GREEN) and edit an existing RSS feed (pressing the YELLOW) of your own
choice. Use the virtual on-screen keyboard to enter any text characters. Please consider to obtain
further information displayed on your screen. To conrm new RSS feeds or to save changes, select
Save and press OK. Use the 9 button to return to the previous step. Press to exit the menu and to
go back to the viewing mode.
7.3.2 Weather
This submenu allows you to watch the weather in your region. Information about current weather
conditions and forecasts will be provided on your screen. You can refresh the information about
weather conditions (RED), change the location (GREEN) or select a city from the list (YELLOW). Use
the virtual on-screen keyboard to enter text characters. Please consider the information provided
on your screen. To conrm the location/city, select Save and press OK. To change the standard
temperature from Celsius to Fahrenheit and vise versa press the BLUE button. Use the 9 button to
return to the previous step. Press to exit the menu and to go back to the viewing mode.
7.3.3 Ethernet Cong
This submenu allows you to setup or check the Internet connection.
The default selection for DHCP eld is On. Normally all settings and connection are done
automatically. To test if the Internet connection works, select SET eld and press OK. If successful,
on-screen messages will conrm and you can start using it. Otherwise please check your cable and
router. You can set the DHCP eld to O and dene all required IP addresses manually using the 0~9
keys. To save all new address denitions, please select the SET eld and press OK.
7.4 Installation
Use t u to access the menu Installation, which includes the following submenus: Dish Setting,
Channel Search, Information, Factory Default and CA INFO. Use pq to select the submenu and
press OK.
7.4.1 Dish Setting
The dish setting procedure from the menu is almost the same, as it was described in the First Time
Installation chapter 4.2.2. This section contains more detailed information of how to add or modify
your antenna parameters. Use pq to select required parameters. Use t u to change option values
or OK to select it from the list. Use the 9 button to return to the previous step. Press to exit the
menu and to go back to the viewing mode.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS844 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS844 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS844

Thomson THS844 User Manual - German - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info