658794
20
Zoom out
Zoom in
Previous page
1/30
Next page
P20
7. MAIN MENU
NOTE: If you are using another Parental Lock function than Unblocked, all FTA channels which support
EPG or submit EPG based parental rate will require entering of your PIN code DEFAULT PIN: 0000.
7.1.5 Factory Reset
A factory reset will restore your receiver to the factory default settings. It will delete all settings and channels. To
reset the receiver, you have to enter your PIN code DEFAULT PIN: 0000, then use pq to select OK to execute
or Cancel to return to the menu. Afterwards the receiver will restart with the First Time Installation.
WARNING: A factory reset will permanently delete all your personal settings, timers and stored channels.
Please consider this before you perform a factory reset. If you want to backup your settings before
performing a factory reset, please refer to chapter 7.2.2 Backup to USB device!
7.2 Update & Info
This menu allows you to check information about your current software, create a backup of your channels, load
a backup into the receiver and update the receiver via USB or OTA (download via satellite). It consists of the
following sub-menus: Receiver Information, Backup to USB device, Load Backup from USB device, USB Update and
OTA Software Update. Choose a sub menu with pq and press OK to advance. For Backup to USB device and
Load Backup from USB device these functions will be executed by pressing OK directly.
7.2.1 Receiver Information
In this submenu you can find information about the software and hardware version of your receiver. A customer
support agent might ask for the information given in this screen. Press
to return to the menu.
7.2.2 Backup to USB device
In the Update & Info menu select Backup to USB device with pq and press OK to execute a current backup of
your channels, transponders and user settings. When the message Please wait... disappears the receiver has
successfully created the “userdata.bin” file to the root directory of your USB device which you can save if you
need to reset the receiver and easily want to load this backup into the receiver.
7.2.3 Load Backup from USB device
In the Update & Info menu select Load Backup from USB device with pq and press OK to execute loading the
“userdata.bin” file into the receiver. You will only be able to load this kind of file into the receiver so please don’t
rename it, or alternatively rename it again to the above mentioned file name before you load the file to the
receiver again.
7.2.4 USB Update
This function allows you to perform a software update with a USB storage device.
Download the software and update instructions from our website www.thomsonstb.net and unzip it on your
PC. Then load the file to the root directory of your correctly formatted USB storage device and connect it to your
receiver. Turn on the receiver and wait until the USB device is successfully detected.
Press OK in the menu USB Update and confirm the displayed message, then wait until the software update and
loading process begins. After the loading process has been started successfully (a progress banner is displayed)
you can disconnect the USB storage device (or wait until the update is fully loaded)! Please disconnect the USB
device after a successful update in order to restart the receiver!
WARNING: NEVER disconnect the receiver from the mains or switch the power OFF during the update
procedure. It can damage your receiver and warranty will void! In case of an USB software update
please consider that the receiver may delete all channels, data and user settings in certain cases.
You can backup your data at any time, see chapter 7.2.2 Backup to USB device.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS813 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS813 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info