658794
10
Zoom out
Zoom in
Previous page
1/30
Next page
P10
STARTING UP FOR THE FIRST TIME
3.3 Connecting to multiple xed antennas
Fig. 8.
A: Connect the LNBs of your fixed antenna to the desired inputs of a DiSEqC 1.0 switch using a good quality
coaxial cable and suitable ‘F-connectors’.
B: Connect the output or “to receiver” of the DiSEqC 1.0 switch to the SAT IN connector on your receiver using a
good quality coaxial cable and suitable ‘F-connectors’.
C: Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
3.4 Connecting to your motorised dish via DiSEqC 1.2
Fig. 9
Another possibility to watch programmes from multiple satellites is by mounting a dish to a motorized DiSEqC
1.2 or GOTO-X positioner. For the correct setup and mounting of your motorised dish we recommend referring
to the advice of a professional satellite equipment installer to ensure correct alignment and function. Please
ensure that all connections are fitting well and are correctly assembled, then you only need to connect the
“OUT” connector of your positioner to the SAT IN connector on the rear side of your receiver.
3.5 Connecting and using the IR extender
Fig. 7
With the IR extender you can place the receiver out of sight (e.g. a closed cabinet) while still being able to
control it. Plug the IR extender into the IR connector on the back of the receiver. Locate the extender at a
position allowing direct sight to the remote control. Once a suitable location is found, remove the protection
foil from the adhesive tape on the bottom of the extender and fix it by slightly pressing it down on the surface it
should be placed on.
NOTE: We recommend considering the standard adhesive notes (dust-free, fat free, not to coarse materials,
etc.)!
4.0 STARTING UP FOR THE FIRST TIME
Ensure that your satellite signal is of good quality and that all connections are properly setup. In case you
encounter difficulties or you have questions, please ask your local dealer for assistance. It is recommended to
follow the First Time Installation step by step. It will guide you through the basic setup and installation process.
You will enjoy digital HD broadcasts within just a few minutes. If your receiver is not already powered ON,
against our expectation, please use the power switch on the rear side of your receiver to switch it ON. In the
unusual/uncommon case that the receiver should not start-up within the First Time Installation, please reset
the receiver with the factory reset. See chapter 7.1.5 of the user manual on our website: www.thomsonstb.net/
downloads/manuals/THS813_UM_EN.pdf. Please insert your valid and activated Irdeto smart card for proper
reception of the channel bouquet of your choice. For correct insertion of the smart card please see the insertion
drawing.
4.1 Language, Country and Video Settings
After connecting your receiver for the first time, the OSD language, Country and Video Setting menus will be
shown. First choose your language with tu then use pq to select your preferred country. For these settings
you can also use OK to show a list of available settings. Then use pq to select Video Setting. In the Video
Settings you can press tu to choose connection between HDMI and Scart. If necessary, these settings can be
opened by pressing OK. A detailed description of the settings can be found in the chapters 7.1.3.1 HDMI or
7.1.3.2 SCART of the user manual on our website: www.thomsonstb.net/downloads/manuals/THS813_UM_
EN.pdf
NOTE: If you select an HDMI resolution which your TV does not support, the receiver will switch to the
previous setting automatically after ~10 sec. When you see the displayed message, please confirm
the selected resolution by pressing OK.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS813 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS813 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info