658793

Thomson THS811 Manual

12
Zoom out
Zoom in
Previous page
1/30
Next page
P8
QUICK GUIDE TO USING YOUR RECEIVER
4.2 Satellite Selection
This receiver is already adjusted for reception of Astra 19.2 satellite with the correct settings as it is most
common. Per default it is setup for DiSEqC port 1, but you can use the setting as well if you are not
connected to any switch. You only need to change these settings if you are not connected to Astra 19.2 or
you don’t have this satellite connected to port 1 of your DiSEqC switch.
To check or change the settings for the satellite on port 1 press OK to enter the submenu. When port 1
is adjusted correctly and you have proper signal quality and strength banners you can adjust the port 2
if you have a satellite connected there. Press pq to select it and proceed like described in chapter 7.1.1
Antenna Setup in the user manual available on our website: www . thomsonstb . net.
It is possible to adjust settings for up to 4 satellite positions.
4.3 Channel list selection
In this menu you can highlight the option of your choice by pressing tu and then choose the
appropriate option in below.
Please read the displayed instructions for each screen carefully. They will help you adjusting the settings
fast and easy.
NOTE: Using this receiver with satellite Astra 19.2 offers you the possibility to select between 3 channel
lists.
In the Preset CH – List you can choose between HD Austria Senderliste, HD List and ORF List, depending on
your preferences and subscription. The HD Austria Senderliste provides all available channels for viewers
with normal or additional HD Austria subscription in Austria and also includes various popular services
from your selected satellite(s). This list is maintained and updated automatically by the service list provider
and can’t be edited. Editing of channels can only be performed for channels which are saved above
channel number 4000 or additionally saved in favourite list(s). To choose this list select Load HD Austria
Senderliste with pq and press OK to install it. After this step the receiver will scan for the list. When the list
has successfully been loaded, the First Time Installation will be finished.
The HD List starts with all HD Austria channels and also includes all ORF channels. This list can be fully
edited and will not be updated automatically. The ORF List starts with all ORF channels and also includes all
HD Austria channels. This list can be fully edited and will not be updated automatically.
If the HD List or the ORF List have been chosen, press OK on the below Local channels selection and then
use pq and OK to mark/unmark the channels you want to add to your preset list. Press OK on Save to
proceed with the next step.
After choosing one of the channel lists and regional channels, you only need to select Load preset list
and press OK, then the First Time Installation will be finished. Details for a channel search can be found in
chapter 7.1.2 Channel Search in the manual available on our website: www . thomsonstb . net.
5.0 QUICK GUIDE TO USING YOUR RECEIVER
We at THOMSON understand that you can’t wait to enjoy your new HD receiver. The following quick guide
will make you familiar with the basic operation of this device. We do, however, advice you to read the user
manual available on our website: www . thomsonstb . net to get the best performance from your THOMSON
HD receiver.
To switch your receiver ON or to Standby, use the q button on the remote control or the button on the
left side of the front panel.
Choose a channel with pq or the CH+/CH buttons. Alternatively, you can digit the channel number
with the 0~9 buttons on the remote control or press OK in viewing mode to display the channel list.
The volume can be adjusted with the V+/V buttons. The usage of V+/V and is possible in ALL menus
which present a TV picture in the background and can additionally be used in the videotext mode. In
viewing mode you can also use tu.
P+/P enable you to scroll page wise in all list modes to make your channel or other selection as
comfortable as possible.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS811 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS811 in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS811

Thomson THS811 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info