658772
23
Zoom out
Zoom in
Previous page
1/32
Next page
MAIN MENU
P19
7.3.2 DB Management
This menu allows you to save and reload the channel Data Base of your receiver from/to a USB-
device. This very convenient feature enables you to save your personal settings like Channel-,
Favourite-, Sat- and TP-lists on an USB storage device and load them back to the receiver later. This
feature is especially helpful after unintentional changes or factory reset. In such cases just skip the
First Installation by pressing in Installation guide and select the DB management menu.
Connect the USB storage device to your receiver and select one of the options:
7.3.2.1 Load from USB
Press OK for displaying the list with available DB files (if any stored before). The DB files
„HB_DATABASE_DDMM.DBM” are shown with their built date (day and month). Select the DB file you
want to load and confirm it with OK. When the DB has been successfully loaded (message appears
on screen) the receiver will switch automatically to the first stored channel and show its content in
the background. Press until the OSD menu disappears.
7.3.2.2 Backup to USB
Press OK to make a backup of the data base. A DBM file „HB_DATABASE_DDMM.DBM” with the
current date (day and month), will be created on the USB device. When the DB has been successfully
stored a message will be displayed on screen. Press until the OSD menu disappears.
7.3.2.3 SatCR
If a SatCR LNB is used, please refer to the manual of that LNB to obtain the technical data about User
Bands numbers and corresponding frequencies.
Note: SatCR can only work in combination with an optional multi-output (max.
8) satellite splitter and a SatCR LNB, example STRONG type SRT L780 (max. 4
users). Note: SatCR cannot be combined with any other DiSEqC function. SatCR
systems are mainly installed by professional experts.
SatCR A Select SatCR A with p/q and OK, if you only use one SatCR LNB.
SatCR B When using a two satellite SatCR system, select also the 2nd LNB and setup
as described below.
System Automatic select: Pre-programmed User Bands are installed, refer to the
manual of your LNB to know which system is supported by the LNB.
IF Channel Manual select: Select the User band ID number according to the
specifications of your SatCR LNB. Note: Any SatCR LNB user in the chain
needs a different Channel ID number.
Center Freq Manual select: Select the Centre Frequency according to the specifications of
your SatCR LNB, corresponding with the correct IF Channel. Note: Any SatCR
LNB user in the chain needs a different Centre Frequency.
Press to store.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS222 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS222 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS222

Thomson THS222 User Manual - German - 39 pages

Thomson THS222 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info