658772
22
Zoom out
Zoom in
Previous page
1/32
Next page
P18
MAIN MENU
press OK. Press BLUE for Scan. A window with scanning settings will be
displayed. After configuring the settings (explained in 7.3.1.3 above), press
OK or BLUE again to start the scanning of the highlighted transponder.
When the scan process has been completed, all found channels will be
stored and the receiver will switch to the first found channel.
Multi-Transponder Scan:
Select the transponders you want to scan with the OK button. The selected
transponders will be marked with the z symbol. Press BLUE for Scan. A
window with scan settings will be displayed. After configuring the settings
like explained in 7.3.1.2 above, press OK or BLUE again to start Multi-Scan on
all selected transponders.
7.3.1.5 Satellite Edit options
Add satellites: Press RED to add a new satellite. In the pop-up banner, enter the satellite's
name and position by using the p/q tu and 0 ~ 9 buttons.
Satellite Name: Press OK to enter text input mode. In the key table select a character by
using the navigation buttons. Press OK to enter the chosen character. When
you have entered the name, navigate to the “OK” button on screen and press
OK on the remote control to confirm the new name. Save the settings with
OK or cancel by .
Edit satellites: Press GREEN to edit the focused satellite. For changing settings see
explanation above. Confirm changes with OK or cancel by .
Delete satellite: Press YELLOW to delete the focused satellite. Press OK to confirm deleting or
to cancel.
7.3.1.6 Transponder Edit options
Note: Transponders can only be edited when the transponder list is on screen. To do
this, select the satellite you want to edit and press 4 to open the TP list. The
options below are now available.
Add transponder: Press RED to add a new transponder. In the pop-up banner, enter the
transponder´s data by using the p/q tu and 0 ~ 9 buttons. Confirm the
settings with OK or cancel with . An existing TP cannot be stored again
under the same satellite.
Edit transponder: Press GREEN to edit the highlighted transponder. In the pop-up banner,
change the transponder´s data by using the navigation and numeric
buttons. Confirm changes with OK or cancel with .
Delete transponder: Press YELLOW to delete the highlighted transponder. Press OK to confirm or
to cancel.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS222 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS222 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS222

Thomson THS222 User Manual - German - 39 pages

Thomson THS222 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info