474977
23
Zoom out
Zoom in
Previous page
1/29
Next page
P20
MAIN MENU
Information
Shows model, software and hardware information.
Recall List
Enable or disable Recall list function, which supports multi-recall-channel switching.
If the status is set ON then by pressing RECALL button a list of all previous
selected channels will be displayed for new selection. If the status is set OFF then
by pressing RECALL button receiver will switch to the previous selected channel.
Software update
In Main Menu select Software Update and press OK or u to select. There are two
software update options available:
SW update by OTA
The OTA (Over the Air) function allows you to search for software updates available
on satellite. Please ask your local THOMSON dealer or visit our website www.
thomsonstb.net for more information.
In the OTA menu all necessary THOMSON OTA settings (Satellite, Frequency,
Symbol rate and Polarization) are already set per default but could also be changed
manually. Press OK to initiate the update process. An attention banner will now
be displayed. Press OK to start the update (or EXIT to cancel it). Follow the
instructions displayed on screen. The software searching and update process
could take up to 20 minutes depending on the data volume in stream. After the
process is finished (also if no Update was found) the receiver will reboot and start
with the last shown channel.
WARNING: NEVER power off the receiver or pull the mains plug during the
software upgrade process. Doing so might cause irreparable damage to your
receiver and will void your warranty.
SW update by USB
Download the required update file for your receiver model from our website www.
thomsonstb.net (support page) or contact your local dealer.
Unzip the file on your computer, if necessary, and copy it to root folder of your USB
storage device.
Connect USB storage device to the USB port of the receiver. Press MENU and
select Software Update By USB. Press OK to enter the software file list. Select the
file containing the software image and press OK to initiate the software update.
An attention banner will now be displayed. Press OK to start the update (or EXIT
to cancel it). Follow the instructions displayed on screen. The update process will
take some time. Once the update is completed the receiver will display “Software
Upgrade Complete. Please Restart”. Unplug the receiver from the mains and plug it
in again. Your updated receiver will start with the last shown channel.
WARNING: NEVER power off the receiver or remove the USB device during
the software update process. Doing so might cause irreparable damage to your
receiver and will void your warranty.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS220 in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS220

Thomson THS220 User Manual - German - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info