474977
17
Zoom out
Zoom in
Previous page
1/29
Next page
P14
MAIN MENU
Running mode: The Loop through will be switched off when the
receiver is in Standby mode.
Always: The Loop through is always on – in Operation and
in Standby mode.
Switching between DTV/VCR contents in Operation mode is realized by using the
DTV/VCR button on the remote control. “AV IN” will be displayed on the front LED
display when the receiver is in VCR mode. Press the DTV/VCR button again to
return to the digital TV content.
NOTE: The setting “Always” increases the power consumption in Standby
mode. The front panel LED remains green in Standby!
7.3 Channel Search
To access the menu press MENU and select Channel Search. It contains two
options: Installation and DB (Data Base) Management. Select an option and press
OK to enter it. Press EXIT to exit the menu.
7.3.1 Installation
7.3.1.1 Satellite Selection
Use p/q buttons to highlight the satellite your dish is aimed at. Its antenna settings
will be shown at the right side. You can enter the right side with t/u buttons and
return to the satellite list with EXIT.
7.3.1.2 Configure the antenna settings for selected satellite
LNB Type: Press t/u or OK to show the list of LNB Types
which is shown as frequencies. You also can enter
customized frequencies by User Single or User
Dual at the bottom of the list. The default setting
Universal LNB (09750/10600) – the most used on
the market.
LNB Power: Use t/u to set the LNB power. 13/18 V is the
setting for a Universal LNB.
22KHz: Use t/u to switch on or off the 22KHz oscillator
signal. Auto is the setting for a Universal LNB.
Toneburst: To enable or disable the toneburst switcher if
available.
DiSEqC1.0: To select the right port from up to 4 (if available) for
the right LNB.
DiSEqC1.1: To select the right port from up to 16 (if available)
for the right LNB.
Motor: If using a motor use t/u to select between
DiSEqC1.2 or GOTOX depending on the motor
type you use. Then Press OK to show the menu to
set the position or GREEN for location.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS220 in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS220

Thomson THS220 User Manual - German - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info