480544
17
Zoom out
Zoom in
Previous page
1/27
Next page
P12
MAIN MENU
Once all settings are made, press EXIT/SORTIE to leave the System Settings menu. When
returning to the viewing mode the receiver informs with a message that it saves your settings.
7.1.3.1 HDMI
In this submenu you can set following parameters:
TV Ratio: 16:9 or 4:3, depending on the kind of your TV set.
Conversion: Letterbox, PanScan or Combined, to choose the preferred picture format.
Video Output: Only selectable for Scart
Resolution: 576p, 720p or 1080i, to adjust the optimum resolution your TV set
supports.
HDCP: ON or OFF, please see the Note below.
NOTE: HDCP (High Definition Content Protection) is set to ON per default as nowadays all TV sets with
an HDMI connector support HDCP. In case you have problems with the HDMI connection you can use the
Scart setting to deactivate HDCP, which will allow to watch via HDMI without problems. Consider that movies
which are broadcasted with an extra content protection might not be shown when HDCP is set to OFF.
7.1.3.2 SCART
In this submenu you can set following parameters:
TV Ratio: 16:9 or 4:3, depending on the kind of your TV set.
Conversion: Letterbox, Pan &Scan or Combined, to choose the preferred picture
format.
Video Output: RGB or CVBS, depending on what your TV set supports, but for Scart we
recommend RGB.
Resolution: Only selectable for HDMI
HDCP: ON or OFF, please see the Note above.
After all settings are adjusted following to your preference, choose Save with
p/q and press
OK. The receiver returns to the menu.
7.1.3.3 Select Audio Language
In this submenu you can set up to four preferred audio languages:
First Language: Either use OK for a list with all available languages or use
t/u to select
the desired one.
Second Language: Either use OK for a list with all available languages or use
t/u to select
the desired one.
Third Language: Either use OK for a list with all available languages or use
t/u to select
the desired one.
Fourth Language: Either use OK for a list with all available languages or use
t/u to select
the desired one.
The receiver will automatically switch to the preferred audio language whenever available. In case
the first language is not available the second language will be taken into account and in case the first
and second languages are both not available the third language will be taken and so on.
After all settings are adjusted following to your preference, choose Save with
p/q and press
OK. The receiver returns to the menu.
7.1.3.4 Select Subtitle Language
In this submenu you can set up if you want to display DVB subtitles and select your language
accordingly:
Subtitle Display: Use
t/u to select ON or OFF depending on DVB subtitle display being
preferred or not.
Subtitle Language: Either use OK for a list with all available languages or
t/u to select the
desired language.
Whenever available, DVB subtitles will be displayed in the selected language.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS 812 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS 812 in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info