480544
10
Zoom out
Zoom in
Previous page
1/27
Next page
CONNECTIONS
P5
English
NOTE: The batteries must not be recharged, disassembled, electrically short-circuited, be mixed or
used with other types of batteries.
2.6 Using the Remote Control
Fig. 5
To use the remote control, point it towards the front of the digital receiver. The remote control
has a range of up to 5 metres from the receiver at an angle of up to approx. +-30 degrees.
NOTE: The remote control will not operate if its path is blocked.
3.0 CONNECTIONS
3.1 Basic connection
Fig. 6.
1. Connect the LNB or Mono block for ASTRA 19.2 /ASTRA 23.5 of your satellite antenna
to the SAT IN connector of your receiver using a good quality coax cable and suitable
‘F-connector’ plugs.
2. Connect one end of a good quality HDMI cable (V1.3 or higher) to the HDMI connector of
your receiver and the other end to the HDMI input of your TV set.
3. Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
Optional: Connect one end of a good quality Scart cable to the TV SCART of your receiver and
the other end to the SCART input of your TV set.
NOTE: If you use only a single LNB on ASTRA 23.5 satellite, a fully bouquet won’t be available.
3.2 Connecting multiple fixed antennas via DiSEqC 1.0 switch
Fig. 7.
1. Connect the LNBs of your fixed antennas to the desired inputs of a DiSEqC 1.0 switch using
a good quality coax cable and suitable ‘F-connectors’.
2. Connect the output or “to receiver” of the DiSEqC 1.0 switch to the SAT IN connector on
your receiver using a good quality coaxial cable and suitable ‘F-connectors’.
3. Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
3.3 Extended connections for your home entertainment
Fig. 8.
1. Connect the OPTIONAL infrared sensor plug from the appropriate infrared sensor unit for this
receiver (sold separately).
2. Connect one end of a good quality optical audio cable to the S/PDIF output of your receiver
and the other end to the optical audio input of your home theatre, amplifier or any other
device supporting digital audio.
3. Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
3.4 Connecting and using an infrared sensor
With a separately sold infrared sensor you can place the receiver out of sight (e.g. a closed
cabinet) while still being able to control it. Plug the infrared sensor into the “IR” connector on
the back of the receiver. Locate the sensor at a position allowing a direct sight to the remote
control. Once a suitable location is found, remove the protection foil from the adhesive tape
on the bottom of the sensor and fix it by slightly pressing it down on the surface it should be
placed on.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS 812 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS 812 in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info