480543
28
Zoom out
Zoom in
Previous page
1/31
Next page
MAIN MENU
P23
English
Auto Standby: This function is a new, power saving feature that helps you
reducing the power consumption. It switches the receiver to
Standby when no RCU command has been given for at least the
set time. Possible settings are: 1H- 12H and OFF to deactivate
this function.
Standby after Timer setting: This function allows you to determine whether the receiver should
switch to standby after the end of the programmed timer(s) On, or
whether the receiver should remain switched on Off.
NOTE: 5 min after switching the receiver to Standby it enters the deep sleep mode. In this time the
receiver is able to start up quickly. Starting up from deep sleep takes approx. 1 min.
7.5.2 Set Timer
Timers can be used to schedule recordings or to switch to a certain channel at a desired
moment. It will help you not to miss your favourite events. Above the settings you will see the
current date and timer displayed.
Timer Number: Use
tu to select one of the ten available timers or press OK to
list up.
Channel: With OK you can list up the channel list in a new screen. Use
pq or
PG+/- to select a channel and press OK again to apply this channel.
Timer Type: Choose between Once, Daily or Weekly.
Event Type: Choose between Record or Turn ON.
Month: Only available when Timer Type is Once. Use
tu to select the month.
Date: Only available when Timer Type is Once. Use
tu to select the date.
Day: Only available when Timer Type is Weekly. Use
tu to select the day.
Time: Use the 0~9 buttons to enter the time at which the timer should start.
Duration: Use the 0~9 buttons to digit the duration of the timer. For duration
of 45 min, just enter 45 and press OK or for 1h 30min, just enter
130 and press OK.
Enable: Choose between Yes or No. You have to choose Yes if you want
the timer to start at the desired time.
By pressing the YELLOW Summary button you can check the set timers. Use the RED button
to edit a set timer. Then you have the possibilty to select between Record and Turn ON using
the
tu buttons Use the 0 ~ 9 buttons to enter the time, if would you like to change it. Select
OK to change the timer or Cancel to cancel it. The BLUE button can be used to delete a
desired timer and with YELLOW or EXIT/SORTIE you can close this menu again. Timers set
Enable to Yes are automatically available in the Summary. Once all settings are made, press
EXIT/SORTIE to leave the menu. When returning to viewing mode the receiver will inform with
a message that it saves your settings.
NOTE: In case one timer is in conflict with another or if the set time has already passed, the receiver
will display a warning and ask how to solve the conflict.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS 810 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info