480543
27
Zoom out
Zoom in
Previous page
1/31
Next page
P22
MAIN MENU
Remove USB
Press the YELLOW button to safely remove the USB storage device from your receiver.
NOTE: We recommend to use this function especially for bigger sized HDDs.
Select Partition
Press BLUE to open the selection in case you have more than one partition available on your
USB storage device. Use
tu to select the desired partition and then select OK to change it. In
case you have more partitions formatted in FAT 32 you can also record to them.
Rename recording(s) or sort them
Press MENU to open one of these functions, use
pq to select Rename or + Sort and then
press OK on the desired function. When selected press OK on the recording you want to
rename. Once it is selected, use the 0~9 buttons which support alphanumerical selection like
it is common used for mobile phones. When you have entered the desired name use
pq to
select OK to change the name or Cancel to return.
If you have selected + Sort you can sort the recordings either by date or by alphabet. Press OK
on the desired function in order to execute.
Show event Info of a recording
Press
to display the EPG information for the desired recording in case the channel supports
EPG. Within this information, use
tu to select the next or previous broadcast information
and
pq to scroll in the text. If a recording shows the name of the programme the EPG was
available during recording, if not the channel name will be displayed instead.
WARNING: Within Irdeto encrypted services some events may be protected and fast forward/rewind will be
limited or might not be possible. A corresponding smart card is required for playback of encrypted images. If
the additional offer of HD Austria is used, only the „pairedreceiver can be used for playback (up to 3 receivers
can bepaired” with one smart card). If maturity rating is activated for a specific recording, you need to enter
your PIN Code MATURITY RATING PIN: 0000 before playback can be started.
For questions concerning AustriaSAT or HD Austria, please contact the service telephone:
0820 90 90 93 or visit www.austriasat.at or www.hdaustria.at.
7.5 Timer
In this menu you can adjust the time and programme timers. These submenus are available:
Time adjust and Set Timer.
7.5.1 Time Adjust
This menu allows you to set the way the receiver collects and adjusts the time. You can also
adjust the Auto Standby function here. Use
pq to highlight the setting you wish to change and
tu or 0~9 to change the value of the highlighted setting. Press OK for a list with all available
options for the chosen setting.
Auto Time Setting: Defines if the time is collected automatically via satellite, the default
setting is ON. Use
tu to select OFF if you prefer to set up the
time manually.
GMT Offset: When the Auto Time Setting is kept ON the receiver shows the
current used offset. In case Auto Time Setting is OFF you can
adjust your desired offset between: +0:00-12:00 hours.
Summer time: In case Auto Time Setting is OFF you can adjust the summer time here.
Current Date: In case Auto Time Setting is OFF you can adjust the date here.
Current Time: In case Auto Time Setting is OFF you can adjust the current time here.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS 810 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info