480543
10
Zoom out
Zoom in
Previous page
1/31
Next page
CONNECTIONS
P5
English
30. GREEN In menu for specific functions.
31. YELLOW In menu for specific functions.
32. BLUE In menu for specific functions.
2.5 Installing the Batteries
Fig. 4
Remove the battery cover from the remote control and put 2x AAA size batteries inside the
compartment.
The diagram inside the battery compartment shows the correct way to install the batteries.
1. Open the cover 2. Install batteries 3. Close the cover
NOTE: The batteries must not be recharged, disassembled, electrically short-circuited, be mixed or
used with other types of batteries. If rechargeable accumulators instead of batteries are going to be used,
we recommend using (e.g. NiMH) types with low self-discharge to ensure long time operation of remote
control.
2.6 Using the Remote Control
Fig. 5
To use the remote control, point it towards the front of the digital receiver. The remote control
has a range of up to 5 metres from the receiver, if properly aligned towards the IR eye on the
front panel.
NOTE: The remote control will not operate if its path is blocked or affected by bright/stroboscopic light.
3.0 CONNECTIONS
3.1 Basic connection using an HDMI cable
Fig. 6
1. Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a
good quality coax cable and suitable ‘F-connector’ plugs.
2. Connect one end of a good quality HDMI cable to the HDMI connector of your receiver and
the other end to the HDMI input of your TV set.
3. Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
Optional: Connect one end of a good quality Scart cable to the TV SCART of your receiver and
the other end to the SCART input of your TV set.
3.2 Extended connections for your home entertainment
Fig. 7
1. Connect the IR extender plug into the IR sensor jack of the receiver
2. Connect one end of a good quality optical audio cable to the S/PDIF output of your receiver
and the other end to the optical audio input of your home theatre, amplifier or any other
device supporting digital audio.
3. Connect your USB 2.0 storage device to this connector by using a good quality USB cable
or insert the device directly.
4. Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
3.3 Connecting multiple fixed antennas via DiSEqC 1.0 switch
Fig. 8
1. Connect the LNBs of your fixed antenna to the desired inputs of a DiSEqC 1.0 switch using
a good quality coax cable and suitable ‘F-connectors’.
2. Connect the output or “to receiver” of the DiSEqC 1.0 switch to the SAT IN connector on
your receiver using a good quality coaxial cable and suitable ‘F-connectors’.
3. Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS 810 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info