699788
20
Zoom out
Zoom in
Previous page
1/86
Next page
- EN 7 -
alarm 1 and press the MENU/INFO button to conrm.
7. Use the NEXT/PREV button to scroll to the sound source for the alarm 1. You can choose from
Buzzer, FM, CD or USB. Press the MENU/INFO button to conrm.
8. Use the NEXT/PREV button to set the hour for the alarm 2 and press the MENU/INFO button to
conrm.
9. The minute of alarm 2 will now ash. Use the NEXT/PREV button to scroll to the minutes for the
alarm 2 and press the MENU/INFO button to conrm.
10. Use the NEXT/PREV button to scroll to the sound source for the alarm 2. You can choose from
Buzzer, FM, CD or USB. Press the MENU/INFO button to conrm.
Note: Press the MENU/INFO button repeatedly to turn on/off the alarm 1 and alarm 2 function.
‘AL’ symbol in the top of the display, together with the digit ‘1’ or ‘2’ as appropriate, will conrm when
an alarm has been set.
AL 1------Alarm 1 ON
AL 2------Alarm 2 ON
AL 1 + AL 2 ----Alarm 1 & Alarm 2 are both ON
Stopping the Alarm
When the alarm sounds, press and release the POWER/MODE button.
Alternatively, you can press and release the ‘SLEEP/SNOOZE’ button on the remote control (see
Snooze function below).
Note: If you press the POWER/MODE button to stop the alarm, the alarm symbol will remain on the
display and the alarm will sound again at the same time the next day.
Snooze
When the alarm sounds, you can press and release the ‘SLEEP/SNOOZE’ button on the remote
control. ‘Snooze’ will be displayed, followed by the snooze time countdown, until the alarm sounds
again about 9 minutes later.
Turning off the Alarm
In standby mode, press the MENU/INFO button repeatedly until the AL 1 or AL 2 indicator disappears.
Sleep Timer
You can set your radio to turn off automatically using the sleep timer. You can choose from Sleep off,
10, 20, 30, 40, 50, 60, 70, 80 and 90 minutes.
With your unit switched on (not in Standby mode):
Press the SLEEP/SNOOZE button on the remote control to cycle through the various sleep time
options, such as Sleep off, 10, 20, 30, 40, 50, 60, 70, 80 and 90 minutes.
Note: To cancel the sleep timer, follow the steps for setting the sleep time but stop when ‘Sleep disappears.
Playing a compact disc (CD)
NOTE: Never touch the laser lens inside the CD compartment. Clean the laser lens using a CD cleaner
disc if it becomes dirty.
1. Press the POWER/MODE button to turn on the unit.
2. Press the POWER/MODE button repeatedly to select the CD function.
3. Press the EJECT/+10 button to open the CD door and insert a CD into the tray with the printed
label side facing up.
4. Press the EJECT/+10 button again to close the CD DOOR and the disc will rotate for a few
seconds, then automatically play the 1
st
track.
5. To temporarily pause playback, press the PLAY/PAUSE/SCAN button. To resume, press it again.
6. Press the STOP/SELECT button to stop playback.
Reverse/Forward
1. The
and buttons can be used to jump to a different track number or to scan disc tracks
at high speed.
2. Press the
button once to hear the beginning of the current track. Press it two or more times to
hear previous tracks on the disc.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson MIC201IBT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson MIC201IBT in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info