Manual Thomson MIC201IBT (page 19 of 86) (English, German, Dutch, French, Italian, Portuguese, Spanish)

699788

Zoom out

Zoom in

1/86

- EN 6 -

automatically selected when you switch the radio back on.

Tuning to an FM Station

Press the PLAY/PAUSE/SCAN button to scan up the frequency band.

Press the NEXT/PREV button to ne tune each frequency in 0.05MHz increments.

Note: If reception is still poor, try moving the radio to another location.

Storing an FM Station Preset

Your radio can store up to 20 FM radio stations in its preset memories for instant access to your

favourite stations.

1. Tune the radio to the FM radio station that you wish to preset.

2. Press and hold the PROG/REP/PRESET button for approximately 2 seconds until ‘P01’ is displayed.

3. Use the NEXT/PREV button to move to the preset location to which you would like to store the

radio station (1-20).

4. Press and release the PROG/REP/PRESET button to conrm.

Note: If there is already an existing FM station stored under a preset, it will be over-written when you

store the new station.

Tune to an FM Station Preset

In FM mode:

1. Press and release the PROG/REP/PRESET button.

2. Use the NEXT/PREV button to move to the preset location and station that you would like to listen

to (1-20); the radio will instantly tune to that station and begin to play.

Bluetooth Mode

You must follow several steps to connect your mobile phone:

1. Activate Bluetooth from your mobile phone (please refer to your phone’s user manual)

2. Press the POWER/MODE button to turn on the unit, then press the POWER/MODE button

repeatedly until the “BT” indicator appears on the LCD display. It is now ready to pair automatically.

3. Use your mobile phone to search for a Bluetooth device named “MIC200”.

4. Your mobile phone will locate“MIC200”, and may display connection options. Please connect to it

using the password of “0000” (if any). Once the device is successfully connected, the Bluetooth

indicator “BT connected” appears on the LCD display.

Pairing name: MIC200

Automatically Connecting with Your Phone

Pairing is only needed the rst time the unit and phone are used together. Once the unit and phone have been

paired, they will automatically connect whenever the unit is on and Bluetooth is activated on the phone. The

next time you power on, the unit will automatically connect to the most recently connected phone.

Playback from Bluetooth Device

After successful Bluetooth connection, press the PLAY/PAUSE/SCAN button to play. Press the PREV or

NEXT button to skip the tracks backward or forward. To pause or resume playback, press the PLAY/PAUSE/

SCAN button again. Press and hold the PLAY/PAUSE/SCAN button for 2 seconds to disconnect Bluetooth.

Set the Time and Alarm

In Standby Mode

1. Press and hold the MENU/INFO button until 12H or 24H begins to ash.

2. Use the NEXT/PREV button to scroll to ‘<12H>’ or ‘<24H>’. Press the MENU/INFO button to

conrm.

3. Use the NEXT/PREV button to set the hour and press the MENU/INFO button to conrm.

4. Use the NEXT/PREV button to set the minute and press the MENU/INFO button to conrm

5. Use the NEXT/PREV button to set the hour for the alarm 1 and press the MENU/INFO button to conrm.

6. The minute of alarm 1 will now ash. Use the NEXT/PREV button to scroll to the minutes for the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thomson MIC201IBT in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thomson MIC201IBT Manual

Product: