682707
19
Zoom out
Zoom in
Previous page
1/112
Next page
19
Locking function for the front wheels
Lock: Straighten the front wheels and lock them in-place using the locking pin (audibly clicks into place).
Unlock: Pull out the locking pin and fix it using a half-turn (fig. 15)
Adjusting the seat tilt angle
CAUTION: When adjusting the seat tilt angle always hold the back of the rehabilitation stroller to prevent the child
from being jolted when changing position. We recommend that you make this adjustment with the
child not sitting in the seat unit. If the adjustment is made when the child is sitting in the seat the child
must always be held or supported by a second person.
The seat tilt angle is adjusted using the lever on the headrest frame. Pulling and holding the release lever releases the seat
tilt mechanism which can then be set to a range of positions. These positions are evident from the hole pattern on the
seat mount. Once you have positioned the seat as desired, release the lever and the seat tilt angle will then automatically
lock into place. Check once again that the seat has locked into place properly by pressing on the seat’s backrest. The seat
tilt mechanism must be locked into the corresponding locking hole on both sides of the tRide (fig. 16)
CAUTION: During day-to-day use always ensure that the release lever remains unobstructed and that it is not
accidentally released or locked (by pressing against it or through it coming into contact with
other objects). There is otherwise an increased risk of tipping over/injury to the child.
Active seating position: The seat tilt adjustment of the tRide can be set to an active seating position of -1. A non-locking
spring-loaded pin prevents this position from being accidentally selected. To select the active seating position, pull out
the spring-loaded pin on the seat mounting while adjusting the seat tilt angle (fig. 33)
Once the user leaves the active seating position the spring-loaded pin will once again block the seat tilt mechanism when
the 0° position is exceeded.
Tip-assist (accessory)
Place your foot on the tip-assist then – with both hands on the rehabilitation stroller – tip as required (fig. 17).
Range of adjustments
Seat width
Loosen the four star grips (fig. 18) beneath the seat and slide out the side panels as necessary (fig. 19). If the seat depth
is set to its minimum, the maximum setting for the seat width is governed by the available space between the lateral
backrest upholstery pads. The seat upholstery does not need to be removed to adjust the seat width. Once you have
made the adjustment, re-tighten the star grips.
Seat depth
Loosen all four star grips (that are also used to adjust the seat width) beneath the seat and pull out the seat section
towards you (fig. 20). The seat upholstery does not need to be removed to adjust the seat depth. Once you have made
the adjustment re-tighten the star grips.
Tip: For easy adjustment of the seat depth grip the front edge of the seat with one hand and press against
the bottom part of the backrest (center) with the other.
Arm support
The arm supports are adjustable both in height and depth. To adjust the arm supports loosen both wing nuts, set the
desired height and depth and retighten the nuts (fig. 21).
Back height
Slightly release the lateral backrest upholstery from the seat. Loosen the two knurled screws at the top of the lateral tubes
(fig. 22). Now the back section can be infinitely adjusted in height until the point where it locks into place (the spring-
loaded pin snaps audibly into place). Use Velcro to re-attach the lateral backrest upholstery.
To reduce the back height, press the spring-loaded pin beneath the knurled screw on the right side and slide the back
section downwards until it reaches the desired height (fig. 23).
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomashilfen tRide at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomashilfen tRide in the language / languages: All languages as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info