682715

Thomashilfen EASyS Manual

14
Zoom out
Zoom in
Previous page
1/72
Next page
14
EASyS Modular seating system EASyS Modular Size 1 EASyS Modular Size 2
Seat depth 16 - 28 cm / 6.3 - 11" 24 - 35 cm / 9.4 - 13.8"
Seat width 20 - 30 cm / 7.9 - 11.8" 26 - 35 cm / 10.2 - 13.8"
Back height * 26 - 42 cm / 10.2 - 16.5" 32 - 52 cm / 12.6 - 20.5"
Lower leg length 17 - 30 cm / 6.7 - 11.8" 25 - 36 cm / 9.8 - 14.2"
Hip angle 90° to 140° 90° to 140°
Knee angle 90° to 180° 90° to 180°
Foot angle 78° to 100° 78° to 100°
Turning range of seat 180° 180°
Seat tilt-in-space (on A chassis) -10 to + 35° -10° to +35°
Height adjustment arm support 10 - 14 cm / 3.9 - 5.5" 12 - 18 cm / 4.7 - 7.1"
Size of arm support (w x h) 21 x 10 cm / 8.3 x 3.9" 29 x 12 cm / 11.4 x 4.7"
Size of foot rest (w x d) 29 x 18 cm / 11.4 x 7.1" 33 x 21 cm / 13 x 8.3"
Overall dimensions (l x w x h) 85 x 41 x 57 cm 64 x 48 x 77 cm
33.5 x 16.1 x 22.4" 25.2 x 18.9 x 30.3"
Folded dimensions (l x w x h) 89 x 41 x 38 cm 90 x 48 x 60 cm
35 x 16.1 x 15" 35.4 x 18.9 x 23.6"
Weight (seat) * 7.9 kg / 17.4 Ib 9.6 kg / 21.2 Ib
Carrying capacity (seat) 35 kg / 77.2 Ib 40 kg / 88.2 Ib
* without headrest
Setting up and assembly
Adjustments / adaptations shall be carried out by trained or instructed experts (e.g. medical device consultants of a medical device
dealer) only.
The seat can be removed from the A chassis without needing any tools. Push the click lever below the seat unit forwards and take
the seat unit off the receiver adapter of the chassis forwards. Proceed in reverse order to insert the seat.
CAUTION: Always ensure the click lever engages audibly. Then make sure the seat has clicked into place by pulling it
forwards.
Commercially available tools are required for mounting / dismounting the accessories. Separate mounting instructions and user
manuals are enclosed with the accessories. If they should be missing, you can download the instructions in the download section of
our website www.thomashilfen.com.
Mounting the foot rest
The foot rest is to be fixed to the knee joints. Place the grid joints one upon the other and connect them with the screws (from the
inside), washers (from the outside), and wing nuts (from the outside). (Fig. 1)
Lateral backrest upholstery / side upholstery (EASyS)
Take the two shorter upholstery pieces from the upholstery sets and put them over the lateral tubes. The snap fasteners should point
inwards. The Velcro for fastening the upholstery is situated on each outer side of the curved sections of the back plate. Velcro the upholstery
to the back plate with the side which is pointing inwards. (Fig. 2) Close the upholstery completely with the Velcro at the back. (Fig. 3)
Attach the longer upholstery pieces to the upholstery already mounted using the snap fasteners. (Fig. 4) In addition, velcro each longer
upholstery to the inner sides of the curved section of the back plate.
Lateral backrest upholstery (EASyS Modular)
Make sure that the short side of the upholstery is pointing outwards before mounting. (Fig. 5) Put the lateral backrest upholstery over
the lateral tube and velcro it on the inner and outer side to the curved section of the back plate. Close the Velcro completely – also
over the knurled screw. (Fig. 6-7)
Receiver for sun and rain cover
Both EASyS and EASyS Modular are equipped with receivers for the sun and rain cover. (Fig. 8)
Seat upholstery
Velcro the seat upholstery to the seat plate. Fix the two lower Velcro fasteners around the tubes of the foot rest.
Inserting the seat unit
Place the seat unit on the rear crossbar and move the seat forward and down. The EASyS click system engages automatically and
audibly. (Fig. 9)
Removal of the seat unit
To remove the seat unit, push the click-lever under the seat forward and take the seat unit off the chassis forward. (Fig. 9)
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomashilfen EASyS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomashilfen EASyS in the language / languages: All languages as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info