607243

Thermocet Trimline 10038 Panorama-Corner Manual

11
Zoom out
Zoom in
Previous page
1/49
Next page
Page.11
7. CONCENTRIC FLUE SYSTEM CC
The concentric flue system consists of a 100mm or 130mm Ø inner flue concentric with a 150 mm or 200 mm Ø
outer flue. These flues have been set up concentrically; the combustion gases are exhausted through the internal
flue while the fresh combustion air is supplied between the internal and external flues.
7.1 Components of the concentric flue system. (See page 33)
Different connections are possible using the concentric flue system. These are:
Through the roof face and through the exterior wall.
There are various options for mounting the pathway for this system,
however, there are a few important requirements/conditions:
* The maximum allowable vertical flue length is 12 metres (the sum of the flue length and the calculation
lengths for the bends).
* 90° bends have a 2-metre horizontal calculation length.
* 45° bends have a 1-metre horizontal calculation length.
* The outlet can be installed at any point on the roof face or exterior wall (supply and discharge in an
identical pressure area), but must meet applicable regulations.
* Duct pathways may not be insulated
Important
* Ensure the restriction plate is mounted in the correct manner, as indicated in these instructions.
* The correct restriction plate will provide the unit with the most optimal efficiency, flame image and
combustion.
* Mounting an incorrectly placed restriction plate may cause malfunction of the unit
.
DESCRIPTION SIZE (mm)
A) CONCENTRIC PIPE 1000-500-250
B) 45° BEND
C) WALL BRACKET
D) 90° BEND
E) ADJUSTABLE WALL BRACKET
F) CONCENTRIC FITTED PIPE 250
G) UNIVERSAL MOUNTING PLATE
H) CLAMPING STRIPS
I) CENTRING PLATES (SET)
J) FLAT ALUMINIUM ROOFING SHEET
K) STORM COLLAR
L) EXTERIOR WALL DUCT
M) LEAD ROOFING SHEET, SLOPING 20-45°
N) ROOF PASS-THROUGH
O) ROOFING SHEET, SLOPING 5-30°
P) REDUCER DIAM. 130 MM TO 100 MM
Flue terminal in roof with models 1040-1041-1042-1056-1057 en 1058 with 130-200 mm connection:
Always 1 metre 130-200 mm diam. starting length on top of unit, after which there can be a reduction
to standard size 100-150 mm, see also figure on page 12 and page 28.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thermocet Trimline 10038 Panorama-Corner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thermocet Trimline 10038 Panorama-Corner in the language / languages: English as an attachment in your email.

The manual is 4,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info