606548
43
Zoom out
Zoom in
Previous page
1/56
Next page
Room temperature controller RAM 713 S
theben
Version: Sep-12 (subject to change) Seite 43 von 56
5.2.2 Setpoint temperature offset via Object 0
This option is available only when the following settings have been selected on the
“Operation” parameter page:
or
In this case, the setpoint value is changed by sending the desired offset to Object 0.
This involves the differential (may be preceded by a minus sign) being sent to Object 0 in
EIS5 format.
The offset always refers to the basic setpoint value (as programmed or specified by the rotary
control) and not to the current setpoint value.
Example Basic setpoint value of 21°C:
If a value of 2.00 is sent to Object 0, the new setpoint value is calculated as follows:
21°C + 2.00K = 23.00°C.
To then bring the setpoint value to 22°C, the differential is resent to the programmed basic
setpoint value (here 21°C), in this case 1.00K (21°C+1.00K=22°C)
5.3 External interface
The external interface is activated on the "Settings" parameter page.
It consists of the three inputs E1, E2 and E3.
E1 and E2 are pure binary inputs, and E3 can be used as both a binary and an analogue input
for an external temperature sensor.
All 3 inputs are connected in the base via the connection terminals.
The following functions can be performed:
Switching (1 switch)
Blinds Up/Down (with 2 keys on E1 + E2)
Blinds single button operation (with 1 key)
Dimmer brighter/darker (with 2 keys on E1 + E2)
Dimmer single button operation (with 1 key)
Temperature (only E3)
If the blinds and dimmer functions are performed on 2 keys, E1 and E2 are automatically
connected with each otherand have a common effect on objects 9, 10 und 12.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 713 S KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 713 S KNX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 713 S KNX

Theben RAMSES 713 S KNX User Manual - English - 1 pages

Theben RAMSES 713 S KNX User Manual - German - 56 pages

Theben RAMSES 713 S KNX User Manual - German - 1 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 57 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 1 pages

Theben RAMSES 713 S KNX User Manual - French - 59 pages

Theben RAMSES 713 S KNX User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info