606548
42
Zoom out
Zoom in
Previous page
1/56
Next page
Room temperature controller RAM 713 S
theben
Version: Sep-12 (subject to change) Seite 42 von 56
5.2 Setpoint value offset
For the RAM 713 S, the current setpoint value can be adjusted in two ways.
In increments using the rotary control (see “Operation” parameter page, function of
the rotary control)
Directly via Object 0 “Manual setpoint value offset”
The differential between the setpoint value offset and the basic setpoint value is sent by
Object 1 at each change (e.g. -1.00).
The offset limits are specified on the “Operation” parameter page by the “Maximum setpoint
value offset on the rotary control” parameter and apply to both types of setpoint value offset.
5.2.1 Setpoint temperature offset using the rotary control
This option is available when the rotary control has been enabled on the “Operation”
parameter page.
The +/- rotary control is plugged onto the device for this function (see illustration).
In the central position of the rotary control, the setpoint value offset is zero.
Should the rotary control be turned to the left (+) until it can be turned no further, the setpoint
value will be increased by the programmed maximum setpoint offset.
The offset can be very finely adjusted using the rotary control’s notch.
The change in temperature per scale line depends on the maximum setpoint value offset
which has been programmed.
Table 23
Maximum setpoint value
offset on the rotary
control
Kelvin / °C per scale line
+/- 1 K (i.e. +/-1°C)
1/6
+/- 2 K
1/3
+/- 3 K
1/2
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 713 S KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 713 S KNX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 713 S KNX

Theben RAMSES 713 S KNX User Manual - English - 1 pages

Theben RAMSES 713 S KNX User Manual - German - 56 pages

Theben RAMSES 713 S KNX User Manual - German - 1 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 57 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 1 pages

Theben RAMSES 713 S KNX User Manual - French - 59 pages

Theben RAMSES 713 S KNX User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info