606548
21
Zoom out
Zoom in
Previous page
1/56
Next page
Room temperature controller RAM 713 S
theben
Version: Sep-12 (subject to change) Seite 21 von 56
Continued:
Designation
Values
Meaning
Maximum floor temperature
24°C, 26°C, 28°C, 30°C,
32°C, 34°C, 36°C, 38°C,
40°C, 42°C, 44°C, 46°C,
The floor temperature is
controlled by RAM 713 S
depending on the room
temperature. However, the
floor temperature is not
exceeded even when the
setpoint temperature has not
reached the set maximum
value.
This setting prevents, among
other things, the floor from
becoming deformed through
overheating.
Calibration value for internal
sensor
In 1/10 K (-64 .. 63)
Manual input – 64 ... 63
Positive or negative
correction of measured
temperature in 1/10 K
increments.
Examples: a) RAM 713 sends
20.3°C. A room temperature
of 21.0°C is measured using a
calibrated thermometer. In
order to increase the
temperature of RAM 713 S to
21 °C, “7” (i.e. 7 x 0.1K)
must be entered.
b) RAM 713 sends 21.3°C.
20.5°C is measured. In order
to reduce the temperature of
RAM 713 S to 20.5 °C,
“8” (i.e. -8 x 0.1K) must be
entered.
Calibration value for external
sensor
Manual input – 64 ... 63
See above, calibration value
for internal sensor
Transmission of the actual
value in cycles
(internal and external)
Not in the event of change
at a change of 0.2 K
at a change of 0.3 K
at a change of 0.5 K
at a change of 0.7 K
at a change of 1 K
at a change of 1.5 K
at a change of 2 K
Is the current room
temperature to be sent?
If so, from which minimum
change should this be sent
again?
This setting keeps the bus
load as low as possible.
Cyclical Transmission of the
actual value in cycles
(internal and external)
or
Cyclical the external actual
value in cycles
Do not send cyclically
every 2 min., every 3 min.
every 5 min., every 10 min.
every 15 min., every 20 min.
every 30 min., every 45 min.
every 60 min.
How often should the values
be sent, regardless of the
temperature changes?
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 713 S KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 713 S KNX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 713 S KNX

Theben RAMSES 713 S KNX User Manual - English - 1 pages

Theben RAMSES 713 S KNX User Manual - German - 56 pages

Theben RAMSES 713 S KNX User Manual - German - 1 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 57 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 1 pages

Theben RAMSES 713 S KNX User Manual - French - 59 pages

Theben RAMSES 713 S KNX User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info