606547
61
Zoom out
Zoom in
Previous page
1/65
Next page
RAM 712 KNX room thermostat for surface-mounted and flush-mounted installation
theben
Version: Dec-10 (subject to change) Page 61 of 65
P-control as temperature control
The P-control response during heating control is as shown in the previous example.
The setpoint temperature (21°C) can never quite be reached.
The permanent control deviation increases as the heat loss increases and decreases as the ambient
temperature decreases.
6.6.3 Response of the PI control
Unlike the pure P-control, the PI-control works dynamically.
With this type of controller, the actuating value remains unchanged, even at a constant deviation.
In the first instant, the PI-control sends the same actuating value as the P-control, although the
longer the setpoint value is not reached, the more this value increases.
This increase is time-controlled over the so-called integrated time.
With this calculation method, the actuating value does not change if the setpoint value and the
actual value are the same.
Our example, therefore, shows equivalent in and outflow.
Notes on temperature control:
Effective control depends on agreement of bandwidth and integrated time with the room to be
heated.
The bandwidth influences the increment of the actuating value change:
Large bandwidth = finer increment on control variable change.
The integrated time influences the response time to temperature changes:
Long integrated time = slow response.
Poor agreement can result in either the setpoint value being exceeded (overshoot) or the control
taking too long to reach the setpoint value.
Usually, the best results are achieved with the standard settings or the settings via system type.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 712 KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 712 KNX in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 712 KNX

Theben RAMSES 712 KNX User Manual - English - 2 pages

Theben RAMSES 712 KNX User Manual - German - 67 pages

Theben RAMSES 712 KNX User Manual - German - 2 pages

Theben RAMSES 712 KNX User Manual - Dutch - 2 pages

Theben RAMSES 712 KNX User Manual - Dutch - 61 pages

Theben RAMSES 712 KNX User Manual - French - 62 pages

Theben RAMSES 712 KNX User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info