606547
57
Zoom out
Zoom in
Previous page
1/65
Next page
RAM 712 KNX room thermostat for surface-mounted and flush-mounted installation
theben
Version: Dec-10 (subject to change) Page 57 of 65
6.5 External interface
The external interface is activated on the Settings parameter page.
It consists of 2 binary outputs: E1 and E2.
The status of the inputs can be transmitted on the bus.
Each input is connected via the circuit board, according to application, with a
key or switch (see E1 and E2 labelling on the board).
The inputs have no direct influence on the thermostat function.
They can, however, be linked via a common group address with the presence or with the window
object for example.
The following functions can be performed:
Switching (1 switch)
Blinds Up/Down (with 2 keys on E1 + E2)
Blinds single key operation (with 1 key)
Dimmer brighter/darker (with 2 keys on E1 + E2)
Dimmer single key operation (with 1 key)
Control LED (1mA low-current LEDs without series resistor)
See inputs E1, E2 parameter page
6.5.1 Circuit board
8
Temp. sens.
8
8
E1
8
8
E2
8
Figure 2: Switch/key connections
8
Temp. sens.
+
-
Important: Ensure correct polarity.
8
8
E1
8
8
E2
8
Figure 3: Low current LED connections
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 712 KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 712 KNX in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 712 KNX

Theben RAMSES 712 KNX User Manual - English - 2 pages

Theben RAMSES 712 KNX User Manual - German - 67 pages

Theben RAMSES 712 KNX User Manual - German - 2 pages

Theben RAMSES 712 KNX User Manual - Dutch - 2 pages

Theben RAMSES 712 KNX User Manual - Dutch - 61 pages

Theben RAMSES 712 KNX User Manual - French - 62 pages

Theben RAMSES 712 KNX User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info