Note: Thetimeanddate canalsobechangedinthe"Service"menu
(seepage25).Thereyoucanalsosetthechangeoverfromwinterto
summertime.
4.5 Selecting the Temperature Profile
4.5.1 Program P1 (fixed program)
ComforttemperatureMo-Frfrom6a.m.–10p.m.as
wellasSa-Sufrom7a.m.-11p.m.Inbetweenlow-
ertemperature.
4.5.2 Program P2 (fixed program)
ComforttemperatureMo-Frfrom 6-8a.m.andfrom4to10p.m.as
wellasSa-Sufrom7a.m.– 11p.m.Inbetweenlowertemperature.
4.5.3 Program P3 (freely programmable)
TheprogramP3isanindividuallyprogrammabletemperatureprofile.
ProgramP3isnotprogrammedwhendelivered.Forprogramming
seepage22.
4.5.4 Permanent comfort
Theroomtemperatureispermanentlyregulatedtotheprogrammed
comforttemperature.Thereisnoreduction.
4.5.5 Permanent reduction
Theroomtemperatureispermanentlyregulatedtotheprogrammed
lowertemperature.
4.5.6 Antifreezing
Theroomthermostatonlycomesonwhentheroomtemperaturefalls
belowtheprogrammedantifreezetemperature.
4.6 Checking Current Room Temperature and
Settings - Info Button
WiththeInfo buttonyoucandisplaythecurrentroomtemperatureas
wellasall importantsettingsoftheprogramsetattherotaryswitch.
3. Thedisplaychangesautomaticallyto
thedatesetting.
Settheyear,monthanddate one
aftertheother.Confirmeach setting
withthe OK button.The display
changesautomatically.
4. Thedisplayautomaticallychangestothe set automaticmode,
e.g.displayofthetargettemperature.
OK
Year
2002
Month
04
OK
Day
09.04
OK
P2 P3
P1
MENU
1. PresstheInfo button.Thecurrentroomtemperatureisshownin
thedisplayforapprox. 3 seconds. In ordertocontinuewiththe
check,presstheInfo buttonagain.
2. Thiswayyoucancheckthe followinginformationoneafterthe
other:
- Roomtemperature
- Currentlyactive targettemperature
- Dateandtime
- Switchtimesofthesetprogram(onlyvisiblewithopened
hingedcover).Thefixedprogrammedtemperatureprofiles
andswitchtimes are described insection4.5.
3. The display changes automatically to
the date setting.
Set the year, month and date one
after the other. Confirm each setting
with the OK button. The display
changes automatically.
4. The display automatically changes to the set automatic mode,
e.g. display of the target temperature.
Note: The time and date can also be changed in the “Service” menu (see chap.
5.4). There you can also set the changeover from winter to summer time.
4.5 Selecting the Temperature Profile
4.5.1 Program P1 (freely selectable)
Comfort temperature Mon-Thu from 6.00 - 22.00 hrs and Fri
from 6.00 - 23.00 hrs; Sat 7.00 - 23.00 and Sun 7.00 - 22.00
hrs. Reduced temperature between.
4.5.2 Program P2 (freely selectable)
Comfort temperature Mon-Thu from 6.00 - 8.00 and 16.00 - 22.00 hrs and Fri from
6.00 - 8.00 and 16.00 - 23.00 hrs; Sat 7.00 - 23.00 and Sun 7.00 - 22.00 hrs.
Reduced temperature between.
4.5.3 Program P3 (freely selectable)
The program P3 is an individually programmable temperature profile. Program P3 is
not programmed when delivered. For programming
see chap. 5.
4.5.4 Permanent comfort (using Comfort + Reduced 1)
The room temperature is permanently regulated to the programmed comfort
temperature.There is no reduction.
4.5.5 Permanent reduction (using Comfort + Reduced 1)
The room temperature is permanently regulated to the programmed lower
temperature.
4.5.6 Antifreezing
The room thermostat only comes on when the room temperature falls below
the programmed antifreeze temperature.
4.6 Checking Current Room Temperature and
Settings - lnfo Button
With the lnfo button you can display the current room temperature as well as
all important settings of the program set at the rotary switch.
1. Press the Info button. The current room temperature is shown in
the display for approx. 3 seconds. In order to continue with the
check, press the lnfo button again.
2. This way you can check the following information one after the
other:
- Room temperature
- Currently active target temperature
- Date and time
- Set display type, (i.e. which information is shown in the
display, also see chap. 5.4.2).
20
ENGLISH
