606551
25
Zoom out
Zoom in
Previous page
1/41
Next page
Continuous drive actuator CHEOPS drive
theben
As of: Jul-11 (Subject to change without notice) Page 25 of 41
4.2.3 Strategy 3, with defined valve stroke. (Only for devices from
software version 63/61 drive)
With this option, only the Open position of the valve is calculated by working back from a set
path from the closing position. In order to close the valve, the actuator pushes out the tappet
until the set force is exerted on the valve (closing force for standard valves/valves with high
spring tension).
This calibration strategy is primarily to be used if the actuator tappet touches the valve tappet,
even if it is completely withdrawn, and measurements cannot be performed.
With a completely unknown valve, the 3 mm with closing force for standard valves value is a
usable starting value.
It is always recommended to use the closing force for standard valves first.
This setting is completely suitable for most valves.
The Valve with high spring tension setting should only be tried if you cannot close the valve.
This enables the current consumption to be increased to 15 mA during the pressing of the
rubber seal.
The sequence light comes on if this calibration method fails three times.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben CHEOPS drive KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben CHEOPS drive KNX in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben CHEOPS drive KNX

Theben CHEOPS drive KNX User Manual - English - 1 pages

Theben CHEOPS drive KNX User Manual - German - 42 pages

Theben CHEOPS drive KNX User Manual - German - 1 pages

Theben CHEOPS drive KNX User Manual - Dutch - 43 pages

Theben CHEOPS drive KNX User Manual - French - 43 pages

Theben CHEOPS drive KNX User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info