606550
63
Zoom out
Zoom in
Previous page
1/71
Next page
Continuous valve actuator CHEOPS control
theben
As of: Jul-11 (Subject to change without notice) Page 63 of 71
6 Troubleshooting
Caution: Error codes are only available in the version up to 2008.
Table 28
Response
Error
code
Potential cause
Remedy
All LEDs flash as
continuous light
from bottom to top,
i.e. valve adaption
was unsuccessful
82
No valve
Plug unit onto valve and
reload application
84
Valve tappet is already
touched, although the spindle
of the valve actuator is fully
returned.
Use other valve adapter.
Please contact our Customer
Service.
When the spindle is returned,
the valve tappet must be at
least 3/10 mm away from the
spindle (see below, Check
adapter ring).
81
Valve tappet cannot be moved,
even with maximum force
(120N).
Check whether tappet sits
correctly, if so, replace valve.
81
Following start-up, valve
actuator with valve was
mounted onto a different valve
and must be readapted.
Re-download the application,
valve actuator is then
automatically adapted
81
Valve seal too heavily pressed
Cancel additional pressing of
rubber seal
83
Valve jams
Check valve
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben CHEOPS control KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben CHEOPS control KNX in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben CHEOPS control KNX

Theben CHEOPS control KNX User Manual - English - 1 pages

Theben CHEOPS control KNX User Manual - German - 72 pages

Theben CHEOPS control KNX User Manual - German - 1 pages

Theben CHEOPS control KNX User Manual - Dutch - 76 pages

Theben CHEOPS control KNX User Manual - French - 74 pages

Theben CHEOPS control KNX User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info